Free Delivery on all orders over £99*

LFC IP67 Front and End Cap for 12mm LED Flex

£299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge LFCFIX12 is a two-piece IP67-rated end cap set for 12mm wide LED flex strips, providing a sealed termination for both the front (wired) and rear (non-wired) ends of CCT and RGB LED flex installations. Each cap is moulded from translucent silicone with internal ribs that grip the flex strip and create a moisture-tight seal when pressed into place.

Designed for outdoor LED flex installations where the flex ends are exposed to weather, condensation or water spray, the IP67 rating protects against dust ingress and temporary immersion up to 1m depth for 30 minutes. The caps are used in architectural fascia lighting, garden path lighting, deck perimeter lighting and similar applications where LED flex runs terminate in exposed positions rather than being concealed inside channels or housings.

The front cap includes a moulded cable exit notch that allows the flex's power cable to pass through while maintaining the seal around the strip itself. The rear end cap is solid and closes the non-wired end completely. Both caps fit snugly onto 12mm flex without adhesive or additional clamps, relying on the internal rib structure to hold position once pushed into place. The translucent silicone allows some light to pass through the cap, reducing the hard visual cutoff at the flex end.

Specification
Warranty 1
Downloads

Product Specification Sheet

Frequently Asked

What LED flex does this fit?

The LFCFIX12 fits 12mm wide IP67-rated LED flex strips in both CCT (tunable white) and RGB (colour-changing) formats. It will not fit 8mm or 10mm flex widths — separate cap sizes exist for those.

Does it require adhesive or sealant?

No. The internal ribs inside each cap grip the flex strip and create a seal when the cap is pushed into place. Additional sealant can be used for extra security in fully submerged installations, but is not required for typical outdoor IP67 compliance.

Can it be used indoors?

Yes. While designed for outdoor moisture protection, the caps work equally well indoors to give a clean finish to LED flex terminations and prevent dust or debris entering the flex strip at cut ends.

What's the difference between the front and end cap?

The front cap has a moulded notch allowing the flex's power cable to exit while sealing around the strip. The end cap is solid and fully closes the rear (non-wired) end of the flex run.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge LFCFIX12 is a two-piece IP67-rated end cap set for 12mm wide LED flex strips, providing a sealed termination for both the front (wired) and rear (non-wired) ends of CCT and RGB LED flex installations. Each cap is moulded from translucent silicone with internal ribs that grip the flex strip and create a moisture-tight seal when pressed into place.

    Designed for outdoor LED flex installations where the flex ends are exposed to weather, condensation or water spray, the IP67 rating protects against dust ingress and temporary immersion up to 1m depth for 30 minutes. The caps are used in architectural fascia lighting, garden path lighting, deck perimeter lighting and similar applications where LED flex runs terminate in exposed positions rather than being concealed inside channels or housings.

    The front cap includes a moulded cable exit notch that allows the flex's power cable to pass through while maintaining the seal around the strip itself. The rear end cap is solid and closes the non-wired end completely. Both caps fit snugly onto 12mm flex without adhesive or additional clamps, relying on the internal rib structure to hold position once pushed into place. The translucent silicone allows some light to pass through the cap, reducing the hard visual cutoff at the flex end.

    Specification
    Warranty 1
    Downloads

    Product Specification Sheet

    Frequently Asked

    What LED flex does this fit?

    The LFCFIX12 fits 12mm wide IP67-rated LED flex strips in both CCT (tunable white) and RGB (colour-changing) formats. It will not fit 8mm or 10mm flex widths — separate cap sizes exist for those.

    Does it require adhesive or sealant?

    No. The internal ribs inside each cap grip the flex strip and create a seal when the cap is pushed into place. Additional sealant can be used for extra security in fully submerged installations, but is not required for typical outdoor IP67 compliance.

    Can it be used indoors?

    Yes. While designed for outdoor moisture protection, the caps work equally well indoors to give a clean finish to LED flex terminations and prevent dust or debris entering the flex strip at cut ends.

    What's the difference between the front and end cap?

    The front cap has a moulded notch allowing the flex's power cable to exit while sealing around the strip. The end cap is solid and fully closes the rear (non-wired) end of the flex run.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.