Laurin 220x70 2x10W GU10 Round Ceiling Light - White

The Laurin is a compact round ceiling light fitted with two GU10 lamp holders, each taking a PAR16 reflector lamp up to 10W. The twin-head arrangement gives a directional output that can be aimed where light is wanted rather than spread evenly across a room, making it a flexible accent and task fitting rather than a single broad ceiling glow. American buyers will recognise the GU10 twin-spot format as a surface-mounted multi-light fixture, sitting close to the ceiling on its 220 x 70mm base. Running on 220-240V AC mains, it pairs with standard GU10 reflector lamps, so the colour temperature and beam are set by the lamps you choose to fit.

Because each head can be angled, the Laurin works well over a kitchen worktop, a hallway run, a reading corner or a small home office where pooled, directable light is more useful than flat ambient lighting. Coverage depends on the GU10 lamps fitted and how the heads are aimed, so think of it as picking out specific zones or surfaces rather than washing a whole room. It suits standard domestic ceiling heights and can also be wall mounted, letting the beams graze a feature wall or shelving. For larger rooms, several units spaced along the ceiling give an even chain of light pools.

The body is aluminium alloy in a white finish, weighing 510g, with a round profile measuring 220 x 70 x 108mm. It is rated IP20 for dry indoor use, so keep it to interior rooms and clear of bathrooms or any damp location. The fitting surface mounts to the ceiling or wall and takes replaceable GU10 lamps, which keeps it serviceable and lets you swap brightness or tone over time. Dimming depends entirely on the GU10 lamps and dimmer switch you fit. The Laurin range includes matching single and multi-head versions to suit different layouts.

What room size does the Laurin suit?

It is a twin GU10 spot fitting rather than a broad ambient ceiling light, so it works best picking out specific zones such as a worktop, hallway or reading area. For a whole room you would typically fit two or more units spaced along the ceiling. Brightness depends on the PAR16 GU10 lamps you choose.

Is the Laurin dimmable?

Dimming is determined by the GU10 lamps and the dimmer switch you install, not by the fitting itself. Fit dimmable GU10 reflector lamps and a compatible trailing-edge LED dimmer for smooth control. Always check the lamp packaging confirms dimmability.

Are the lamps included?

The Laurin takes two GU10 PAR16 reflector lamps rated up to 10W each, which let you set the colour temperature and beam to suit the space. Check whether lamps are supplied at the point of purchase, as GU10 fittings are often sold lamp-ready so you can pick your preferred tone.

How do I clean the fitting?

Switch off the power and let the lamps cool, then wipe the white aluminium body with a soft, dry or barely damp cloth. Avoid solvents or abrasive cleaners that could mark the finish. As an IP20 fitting it is for dry indoor use only, so never use a wet cloth that leaves standing moisture.