LAURIN 220x70 2x GU10 Round Ceiling and Wall Light - Black

The Laurin is a round twin-lamp fitting that mounts on either the ceiling or the wall, taking two GU10 lamps rated at a maximum of 10W each. Running on 220-240V AC mains, it accepts standard PAR16 reflector lamps so the output and colour temperature follow whichever GU10 bulbs are fitted. Across the Atlantic this kind of fitting is most often searched as a flush mount LED ceiling light, and the Laurin sits in that bracket while keeping a compact 220mm round footprint with twin directional heads.

The pairing of two adjustable heads makes the Laurin a good fit for hallways, landings, home offices and smaller living areas where a little directional control helps, letting you aim each lamp at a feature wall, artwork or a seating corner. Because the brightness depends on the GU10 lamps chosen rather than a fixed integrated panel, coverage scales with the bulbs you pick, so a pair of higher-output lamps suits a busier kitchen corner while softer lamps work for a relaxed snug. It is well suited to standard domestic ceiling heights and is rated IP20, which means it is intended for dry indoor rooms only and should be kept away from bathrooms or any outdoor position.

Built from aluminium alloy in a black finish, the Laurin measures 220 x 70 x 108 mm and weighs 510 g, giving it a solid feel for a twin-head fitting. It mounts to a flat ceiling or wall surface and takes replaceable GU10 lamps rather than an integrated LED, so bulbs can be swapped as needed and dimming follows the lamp and any compatible dimmer used. The two heads adjust to direct the beams where wanted, and the matt black housing keeps it discreet against darker decor. The wider Laurin range includes other configurations in this body if you need a matching look across rooms.

How much light does the Laurin give and what room size does it suit?

Brightness depends on the two GU10 PAR16 lamps you fit, each rated up to 10W, rather than a fixed output. That makes it best for smaller and medium spaces such as hallways, landings and home offices, where its twin adjustable heads let you direct light onto the areas that need it.

Is the Laurin dimmable?

The fitting itself takes standard GU10 lamps, so dimming depends on the bulbs you choose. Fit dimmable GU10 lamps and pair them with a compatible dimmer switch, and the light will dim. Non-dimmable lamps will not respond to a dimmer.

Does it use a replaceable bulb or an integrated LED?

It uses replaceable GU10 lamps rather than a sealed integrated LED. This means you can swap the bulbs for different outputs or colour temperatures, and replace them individually if one fails without changing the whole fitting.

How do I clean and maintain the Laurin?

Switch the light off and let the lamps cool, then wipe the black aluminium housing with a soft, dry or slightly damp cloth. Avoid abrasive cleaners and solvents, which can mark the finish. As it is rated IP20 for dry indoor use, keep moisture away from the fitting.