Laurin 220x220 4 x GU10 Round Ceiling Spotlight - White

The Laurin is a round four-way ceiling light that takes four GU10 PAR16 lamps, each rated up to 10W, on a 220 by 220 mm plate just 108 mm deep. It runs on 220-240V mains AC, so no transformer is needed, and the four separate heads let you spread the output across a wider area than a single central fitting. American buyers will recognise this format as a flush mount ceiling light fitted with standard GU10 spots, giving you control over the lamp you choose rather than a sealed integrated source.

Designed as a general light for the home, the Laurin suits hallways, landings, kitchens, bedrooms and living rooms where four directional lamps give even, well-distributed light across the room. Because each of the four heads carries its own GU10, you can angle the beams to wash a wall or light a worktop while keeping the rest of the room covered. With its shallow 108 mm depth and compact round footprint it sits comfortably on standard domestic ceilings, and the output you get depends on the GU10 lamps you fit, so a brighter set lifts the whole space.

The body is aluminium alloy in a clean white finish, with the GU10 caps making lamp changes simple from below without tools. It is rated IP20, which means it is for dry indoor rooms only and should be kept out of bathrooms, porches and any damp or outdoor setting. The fitting can be mounted on either a ceiling or a wall, and dimming depends entirely on the GU10 lamps you choose paired with a compatible dimmer. The Laurin range also includes other sizes and head counts in matching white if you want a consistent look across several rooms.

What size room does the Laurin suit?

It carries four separate GU10 lamps, so it covers more ground than a single-source fitting and works well in average-sized hallways, kitchens, bedrooms and living rooms. The actual brightness depends on the GU10 lamps you fit, since they are not supplied, so choosing a higher-output lamp lifts the light across the whole space.

Can the Laurin be dimmed?

The fitting itself does not control dimming. Because it uses four replaceable GU10 lamps, you can dim it by fitting dimmable GU10 lamps and pairing them with a compatible dimmer switch. Check that both the lamp and the dimmer are rated for dimming before installing.

Is the Laurin suitable for a bathroom or outdoors?

No. It is rated IP20, which means it is for dry indoor use only. It should not be installed in bathrooms, near showers, in porches or carports, or in any damp or outdoor location.

How do I clean the Laurin?

Switch off the power and let the lamps cool, then wipe the white aluminium body and the GU10 heads with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, which can mark the white finish, and make sure everything is dry before switching back on.