LAURIN Ø220 3x GU10 Round Ceiling Light - White

The Laurin is a round ceiling light that holds three GU10 lamps, each rated up to 10W, running from a standard 220-240V mains supply. The three PAR16 spots sit within a compact 220mm round body, giving you separate points of light from a single fitting rather than one broad wash. American buyers will recognise this format as a flush mount ceiling light with built-in spot heads. The light source is not integrated, so the GU10 lamps you fit determine the brightness, colour temperature and beam character, and they can be swapped as your needs change.

Designed for indoor rooms, the Laurin suits hallways, landings, bedrooms and living spaces where a low-profile fitting works better than a hanging pendant. The three-lamp layout lets you point light across a wider area or focus it on a particular zone, which makes it a practical choice for rooms with a few key spots to cover such as a reading chair or a console table. At 108mm deep it stays close to the ceiling, so it works well in rooms with limited head height. Because the actual output depends on the GU10 lamps fitted, plan coverage around the lamps you choose, using cooler, brighter lamps for task areas and warmer ones for relaxed spaces.

Built from aluminium alloy with a white finish, the Laurin is rated IP20 for dry indoor use, so keep it clear of bathrooms, porches and any damp or exposed locations. It mounts to either a wall or ceiling and accepts GU10 lamps, which fit without any separate driver or transformer. The fitting weighs around 900g and measures Ø220 × 108mm. Whether the light dims depends on the GU10 lamps you fit and the wiring circuit, since the fixture itself simply holds the lamps. The Laurin sits within our wider range of GU10 spot fittings if you want a matching look across several rooms.

How many rooms or areas can it cover?

The Laurin holds three GU10 lamps, so the light it gives out depends entirely on the lamps you fit. With three separate spots it suits small to medium rooms such as a bedroom, landing or hallway, and you can choose brighter lamps for larger spaces or to highlight specific areas.

Are the bulbs included, and can I choose the colour temperature?

The Laurin takes three GU10 PAR16 lamps, each rated up to 10W, and these are not part of the fitting itself. This lets you pick warm white for a relaxed feel or cool white for clearer task light, and swap them later if your needs change.

Is it dimmable?

The fitting holds standard GU10 lamps, so dimming depends on choosing dimmable GU10 lamps and a compatible dimmer switch on the circuit. The Laurin itself places no limit on this, as it simply houses the lamps you fit.

How do I clean it?

Switch the light off and let the lamps cool, then wipe the white aluminium alloy body with a soft, dry or slightly damp cloth. Avoid abrasive cleaners so the finish stays intact, and check the lamps are seated correctly when you refit them.