LAURIN 110x70 GU10 Round Ceiling Spotlight - Black

The Laurin is a compact round ceiling light built around a single GU10 lamp holder, taking a PAR16 reflector lamp up to 10W. It mounts to either ceiling or wall, so it works as a fixed downward fitting or as an angled accent point depending on where it is sited. The colour temperature and brightness follow whichever GU10 lamp you fit, which lets you tune the output to the room. American buyers will recognise the format as a small GU10 spotlight or accent can-style fixture, sized for tight ceiling positions rather than broad ambient coverage.

Because it carries one PAR16 lamp, the Laurin is best treated as a directional accent fitting rather than a whole-room light. It suits picking out a feature wall, artwork, a worktop edge or a hallway run, and several can be grouped to wash a larger area between them. Coverage depends entirely on the GU10 lamp chosen and its beam, so plan the spacing around the throw you want rather than a single fixture lighting a full room. With its modest 110 mm body it fits comfortably on lower ceilings and in alcoves where a larger fitting would feel heavy.

Construction is aluminium alloy in a black finish, giving a solid feel at a low 250 g weight and a 110 × 70 × 110 mm footprint. It is rated IP20, so it is for dry indoor positions only and should be kept out of bathrooms, porches and any damp or exposed location. Dimming and colour temperature are governed by the GU10 lamp fitted rather than the fixture itself, so choose a dimmable lamp if you want adjustable levels. The Laurin range includes further fittings in this style for matching a scheme across a room.

What size lamp does the Laurin take?

It uses a single GU10 PAR16 lamp rated up to a maximum of 10W. This is a widely stocked fitting, so you can pick the brightness and colour temperature that suits the space. The lamp is not part of the fixture body, so it can be swapped at any time.

Can it be used outdoors or in a bathroom?

No. The Laurin is rated IP20, which means it is for dry indoor use only. It should not be fitted in bathrooms, porches, carports or any damp or exposed position.

Is the fitting dimmable?

Dimming is determined by the GU10 lamp you install rather than by the fixture itself. Fit a dimmable GU10 lamp on a compatible dimmer switch if you want adjustable levels. A non-dimmable lamp will run at a fixed output.

How do I clean it?

Wipe the aluminium body with a soft, dry or slightly damp cloth, with the power switched off and the fitting cool. Avoid solvents or abrasive cleaners, which can mark the black finish. Let it dry fully before switching back on.