Free Delivery on all orders over £99*

Lamp Rubber Suction Cup 35mm - LSC1

£149
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available

Minimum order for this item is 10.

Description

The Knightsbridge LSC1 is a 35mm diameter rubber suction cup designed to secure lamp holders and lightweight light fittings to smooth, non-porous surfaces such as glass, glazed tiles, mirrors and acrylic panels. The translucent rubber cup creates a vacuum seal when pressed against a clean, flat surface, holding the fitting in place without drilling or adhesive.

Commonly used for temporary lighting installations in shop windows, exhibition stands, bathroom mirrors and decorative glass partitions, the suction cup allows fittings to be repositioned or removed without leaving marks. The cup pairs with compatible lamp holders that have a threaded or clip-on attachment point on the back. The rubber compound remains flexible across typical indoor temperature ranges, maintaining the seal over extended periods.

The 35mm diameter suits lightweight E14 and small E27 lamp holders, decorative LED modules and low-voltage fittings where the combined weight of the holder, bulb and cable does not exceed the suction capacity. For reliable adhesion, the surface must be smooth, clean and free from dust, grease or texture — the cup will not adhere to porous surfaces like painted plaster, untreated wood or textured glass.

Specification
Diameter 35 mm
Downloads

Product Specification Sheet

Frequently Asked

What weight can the suction cup hold?

The safe load depends on the surface material, temperature and installation quality. The cup suits lightweight lamp holders, small E14 bulbs and decorative LED modules. For critical or permanent installations, check the manufacturer's specification sheet or contact us for weight capacity data.

What surfaces does it work on?

The cup adheres to smooth, non-porous surfaces including glass, glazed ceramic tiles, mirrors, polished metal and acrylic panels. It will not adhere reliably to porous or textured surfaces such as painted walls, untreated wood, frosted glass or rough stone.

How do you remove it without damaging the surface?

Gently lift one edge of the rubber cup to break the vacuum seal, then peel the cup away from the surface. Do not pull directly outward while the seal is intact as this can stress the rubber or the surface.

Can it be reused?

Yes. Clean the cup with warm water and a mild detergent to remove dust and residue, then dry thoroughly before reapplying to a clean surface. Avoid using solvents or abrasive cleaners that can degrade the rubber.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge LSC1 is a 35mm diameter rubber suction cup designed to secure lamp holders and lightweight light fittings to smooth, non-porous surfaces such as glass, glazed tiles, mirrors and acrylic panels. The translucent rubber cup creates a vacuum seal when pressed against a clean, flat surface, holding the fitting in place without drilling or adhesive.

    Commonly used for temporary lighting installations in shop windows, exhibition stands, bathroom mirrors and decorative glass partitions, the suction cup allows fittings to be repositioned or removed without leaving marks. The cup pairs with compatible lamp holders that have a threaded or clip-on attachment point on the back. The rubber compound remains flexible across typical indoor temperature ranges, maintaining the seal over extended periods.

    The 35mm diameter suits lightweight E14 and small E27 lamp holders, decorative LED modules and low-voltage fittings where the combined weight of the holder, bulb and cable does not exceed the suction capacity. For reliable adhesion, the surface must be smooth, clean and free from dust, grease or texture — the cup will not adhere to porous surfaces like painted plaster, untreated wood or textured glass.

    Specification
    Diameter 35 mm
    Downloads

    Product Specification Sheet

    Frequently Asked

    What weight can the suction cup hold?

    The safe load depends on the surface material, temperature and installation quality. The cup suits lightweight lamp holders, small E14 bulbs and decorative LED modules. For critical or permanent installations, check the manufacturer's specification sheet or contact us for weight capacity data.

    What surfaces does it work on?

    The cup adheres to smooth, non-porous surfaces including glass, glazed ceramic tiles, mirrors, polished metal and acrylic panels. It will not adhere reliably to porous or textured surfaces such as painted walls, untreated wood, frosted glass or rough stone.

    How do you remove it without damaging the surface?

    Gently lift one edge of the rubber cup to break the vacuum seal, then peel the cup away from the surface. Do not pull directly outward while the seal is intact as this can stress the rubber or the surface.

    Can it be reused?

    Yes. Clean the cup with warm water and a mild detergent to remove dust and residue, then dry thoroughly before reapplying to a clean surface. Avoid using solvents or abrasive cleaners that can degrade the rubber.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.