Description
The Kermora is an LED panel light for the ceiling, made of two square frames that interlock at one corner and sit on a compact central mount. The body is steel in a black finish, and each frame carries a white plastic diffuser along its full length. It measures 52.5cm long, 31cm wide and 7cm high, so it sits close to the ceiling. The light comes from integrated LEDs: two lights of 11W each, with each one giving 1,470 lumens at 4000K, a cool white. It is rated IP20, which means it belongs indoors in a dry room.
With its crisp geometric outline and cool white light, this black ceiling light suits a study, a home office, a hallway or a living room, anywhere you want clear, bright light for reading and working. A colour temperature of 4000K gives a bright, clean white that keeps detail sharp on a desk or a bookshelf, and the black frames draw a strong outline against a pale ceiling even during the day with the LEDs unlit. Because it is only 7cm high, it keeps headroom clear in rooms with lower ceilings, which makes it a sensible choice for a landing or a smaller bedroom.
Inside each frame, the LEDs are built in behind the white plastic diffuser, which softens their glow. This light is not dimmable and has no switch of its own; it is switched at the wall, so it pairs with a standard on and off wall switch rather than a dimmer. It runs on a 220-240V mains supply, carries an energy class of E and weighs 0.81KG packed. As a wired mains light, it should be installed by a qualified electrician, and the installation instructions come as a PDF download.
Specification
| Length |
52.5cm |
| Width |
31cm |
| Height |
7cm |
| Body Material |
Steel |
| Body Colour |
Black |
| Shade Material |
Plastic |
| Shade Colour |
White |
| Light Source |
LED, integrated |
| Wattage |
2 x 11W |
| Lumens |
1,470lm per light (2 lights) |
| Colour Temperature |
4000K |
| Dimmable |
No |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
E |
| Weight (packed) |
0.81KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can this ceiling light go in a bathroom?
We would keep it out of bathrooms. It is rated IP20, which means it is meant for dry indoor rooms such as a living room, study or hallway.
How bright is the light?
It has two integrated LED lights of 11W each, and each one gives 1,470 lumens of cool white light at 4000K.
Is the Kermora dimmable?
No, it is not dimmable and has no switch of its own, so it is controlled by a standard on and off wall switch.
How large is it?
It is 52.5cm long, 31cm wide and only 7cm high, so it sits close to the ceiling and suits rooms with lower ceilings.
What materials are used?
The body is steel with a black finish, and the diffusers that cover the LEDs are white plastic, giving a crisp black and white look.