KANTI 170x170 12W Square LED Downlight - White

The KANTI is a square recessed LED downlight that draws 12W and delivers 780 lumens of neutral 4000K white light. Across the US market a recessed unit like this is what buyers call a can light, and the KANTI fits that brief in a compact square trim rather than the more common round profile. Its wide 110 degree beam angle spreads light evenly rather than tightly spotlighting, so the output washes across a ceiling line instead of pooling in one place. The integrated LED runs at 65 lm/W and is tuned to a clean, slightly cool tone that keeps colours looking natural at Ra 80.

Indoors this downlight suits hallways, kitchens, utility rooms and landing areas where a low-profile ceiling fitting is wanted. At general lighting levels it covers around 3 m², so a small run of several units works well for laying out even illumination along a corridor or over a worktop. The 110 degree spread makes it forgiving on standard domestic ceiling heights, filling the room rather than casting hard shadows. With an IP20 rating it is built for dry interior spaces only, so keep it clear of bathrooms, porches and any damp or exposed location.

The body is aluminium alloy in a white finish, measuring 170 by 170 by 35 mm and weighing 360 g, with a square trim that drops flush into the ceiling. It mounts as a recessed ceiling fitting and is not dimmable, running directly from a 220 to 240V AC supply. Rated for 15,000 hours, it is a fit-and-forget choice for general domestic lighting. The KANTI range includes other wattages and sizes if you need to match output across different rooms.

What size cut-out hole does it need?

The KANTI has an overall trim of 170 by 170 mm, and the recessed cut-out it drops into is smaller than this. Always confirm the exact cut-out figure on the spec sheet before cutting, as the trim and the cut-out are not the same measurement. Mark and cut the square aperture carefully so the trim sits flush against the ceiling.

Is this downlight dimmable?

No, the KANTI is not a dimmable fitting and should be run on a standard non-dimming switch. Wiring it to a dimmer can cause flicker or shorten the LED lifespan. If you need adjustable brightness, look at a dimmable model elsewhere in the range.

How many would I need for a room?

At general lighting levels each unit covers around 3 m², so a medium room or corridor typically takes several spaced evenly across the ceiling. The wide 110 degree beam means you can set them slightly further apart than a tight-spot downlight. Plan the layout so the light overlaps gently between fittings for even coverage.

How do I clean the fitting?

Wipe the white trim with a soft, dry or slightly damp cloth once the fitting is switched off and cool. Avoid solvents or abrasive cleaners, which can mark the aluminium finish. As an IP20 fitting it must stay dry, so never let water run into the recessed body.