BLINGO UAIO 600x600 40W Low Glare Surface LED Panel - Colour Selectable Mains 90 deg - White

The BLINGO UAIO is a square surface-mounted LED panel measuring 595 x 595 mm, drawing up to 40W from a 220-240V AC mains supply. It puts out 3990 to 4370 lm depending on the chosen tone, with colour selectable output switching across 3000K warm white, 4000K neutral white and 6500K cool white. The low-glare 90 degree optic spreads light evenly while keeping the panel comfortable to sit under, and the high Ra 90 colour rendering keeps finishes and skin tones looking true. North American buyers will know this 600x600 format as a 2x2 panel, the standard square module used across offices and shops.

This UAIO low-glare version suits rooms where people look up at the ceiling for long stretches, such as studies, treatment rooms, meeting rooms and reception areas. At general lighting levels it covers around 13 to 15 m², so a single unit comfortably lights a small office or a domestic room, while pairs or runs suit larger open spaces. Because it is a dry indoor IP20 fitting, keep it clear of bathrooms, porches and any damp or exposed location. The 90 degree beam and reduced glare make it a sensible choice above desks and screens where a wide-open optic would cause reflections.

The body is steel with a clean white finish and a square profile just 40 mm deep. It is surface-mounted, fixing directly onto a solid ceiling face and sitting proud of the surface, so no ceiling void is needed. The driver is included, the panel is not dimmable, and rated life is 50,000 hours. The 90 degree optic gives a controlled UGR19 low-glare performance. The Blingo range also offers a recessed version for suspended grid ceilings if your install calls for a flush fit, and we stock matching sizes and tones across the range.

Product Specification Sheet

Range Datasheet

Is this panel recessed or surface-mounted?

This UAIO version is surface-mounted, fixing directly onto a solid ceiling face with no void required. It sits proud of the surface rather than dropping into an opening. The Blingo range also includes a recessed version if you need a flush grid-ceiling fit.

What does the low-glare optic mean in practice?

The 90 degree optic is tuned to a UGR19 low-glare rating, which keeps the panel comfortable to look towards over long periods. That makes it well suited to desks, screens and meeting rooms where a standard open beam can cause reflections. The wide spread still delivers even, well-distributed light across the room.

How do I change the colour temperature?

The panel is colour selectable across 3000K warm white, 4000K neutral white and 6500K cool white. The tone is set at installation using the selector on the fitting, so you can match it to the room rather than committing to one fixed colour. Output sits between 3990 and 4370 lm depending on the tone chosen.

How do I clean the panel?

Wipe the face gently with a soft, dry or slightly damp cloth once the panel is switched off and cool. Avoid abrasive pads and harsh solvents, which can mark the diffuser. As an IP20 indoor fitting it should never be exposed to running water or used in damp areas.