Description
The BLINGO AIO is a square surface-mounted LED panel that fixes onto the face of a solid ceiling and sits proud of the surface, so it needs no ceiling void above it. It draws a maximum of 40W from a 220 to 240V AC mains supply and delivers between 4460 and 4900 lumens depending on the chosen tone. The light is colour selectable across 3000K, 4000K and 6500K, so the same fitting can run warm white, neutral white or daylight. A wide 115 degree beam angle spreads the output evenly across the room rather than pooling it in one spot. North American buyers will recognise the 595 by 595 mm body as a 2x2 panel.
This 600x600 format suits kitchens, home offices, utility rooms, retail floors and reception areas where a clean, low-profile ceiling light is wanted. At its brightest it covers around 15 to 16 m² at general lighting levels, which makes it a sensible single fitting for a medium room or one of several across a larger open space. Because it mounts onto the ceiling face it works well where there is no accessible void, including on concrete soffits and plasterboard with no plenum behind it. The colour selectable switching lets you set a warmer tone for a kitchen-diner or a cooler daylight tone for task and workshop use.
The panel is built from steel with a white finish and measures 595 by 595 by 40 mm, weighing 1.80 kg. It carries a CRI of Ra 90 for accurate colour rendering and is rated to 50,000 hours. The mains driver is included in the package, so no separate driver needs sourcing, and the fitting runs direct once wired and surface-fixed to the ceiling. It is rated IP20 for dry indoor use and is not dimmable. The wider Blingo range also includes a recessed version for ceilings with a usable grid or void.
Specification
| Power |
max 40W |
| Voltage |
220-240 AC |
| Luminous flux |
4460/4900/4700 lm |
| Colour temperature |
3000/4000/6500K |
| Colour rendering (CRI) |
Ra 90 |
| Beam angle |
115° |
| IP rating |
IP20 |
| Dimmable |
No |
| Driver included |
Yes |
| Mounting |
Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Square |
| Dimensions |
595 × 595 × 40 mm |
| Weight |
1.80 kg |
| Material |
Steel |
| Finish |
White |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Is this panel recessed or surface-mounted?
This BLINGO AIO is surface-mounted, so it fixes onto the face of a solid ceiling and sits proud of the surface with no void required. The wider Blingo range also offers a recessed version for ceilings that have a usable grid or plenum behind them.
How do I change the colour temperature?
The panel is colour selectable across 3000K warm white, 4000K neutral white and 6500K daylight. The tone is set on the fitting at installation, letting you match a warmer light for living spaces or a cooler daylight tone for kitchens and offices.
Do I need to buy a separate driver?
No. The mains driver is included with the panel, and it runs directly from a 220 to 240V AC supply once wired in. There is nothing further to specify or source separately.
How should I clean the panel?
Switch off the supply and let the fitting cool, then wipe the diffuser with a soft, dry or slightly damp cloth. Avoid solvents and abrasive cleaners, as these can mark the white finish and the light-emitting surface.