Description
The BLINGO is a recessed LED panel light measuring 595 x 595 mm, sized to drop neatly into a 600x600 ceiling. American buyers will recognise this 2x2 footprint as a standard troffer format for a suspended grid. It draws 34W direct from mains at 220-240V AC and delivers 4080 lumens in a fixed 4000K cool white, a crisp neutral tone that reads clean and bright. A wide 115 deg beam angle spreads the output evenly across the panel face rather than pooling it, so the light arrives as a soft sheet rather than a hot spot.
Cool white at this level suits workspaces, kitchens, retail floors and busy domestic rooms where clarity matters more than warmth. At general lighting levels the 4080 lumen output covers around 14 m², which makes a single panel a sensible fit for a modest office, a utility room or a kitchen, with two or more panels laid across a larger open-plan area. Because it recesses into the ceiling, allow clearance in the void above the grid for the fitting body and its driver. Mounting height of a standard ceiling keeps the spread comfortable across the floor below.
Construction is a steel housing in a white finish, weighing 1.37 kg, with a square profile just 25 mm deep so it sits flush against the grid. The integrated driver is included and runs straight from mains, so there is nothing extra to specify on install. Rated to IP20, this is a dry indoor fitting and should be kept clear of bathrooms, porches and any exposed location. It is not dimmable and runs to a rated 50,000 hours. The BLINGO range also includes a 3000K warm white version of this panel for rooms wanting a softer tone.
Specification
| Power |
34W |
| Voltage |
220-240 AC |
| Luminous flux |
4080 lm |
| Efficiency |
120 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
115° |
| IP rating |
IP20 |
| Dimmable |
No |
| Driver included |
Yes |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
50,000 hours |
| Shape |
Square |
| Dimensions |
595 × 595 × 25 mm |
| Weight |
1.37 kg |
| Material |
Steel |
| Finish |
White |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Does this panel fit a standard suspended ceiling grid?
Yes. At 595 x 595 mm it drops into a standard 600x600 grid, the format US buyers know as a 2x2 troffer. You will need clearance in the void above the grid for the panel body and its driver, as it recesses rather than sitting on the surface.
How many lumens does it give and what room size does it suit?
It produces 4080 lumens at a fixed 4000K cool white. At general lighting levels that covers around 14 m², so one panel suits a modest office, utility room or kitchen, with additional panels for larger open-plan spaces.
Does it need a separate driver?
No. The driver is included and built in, and the panel runs straight from 220-240V mains AC. There is nothing extra to source or specify when you install it.
How do I clean the diffuser?
Wipe the panel face gently with a soft, dry or barely damp cloth once the fitting is switched off and cool. Avoid abrasive pads and solvents, which can mark the diffuser. As an IP20 fitting it should never be doused with water.