Description
The Infinity is a recessed downlight that drops a single, controlled pool of light into the ceiling rather than spreading it flatly across a room. A COB LED is held behind an 85mm front ring in matt black, so the source stays out of the direct line of sight and the beam reads as a clean wash onto the floor, a table or a run of units below. Lit, it gives a warm, even circle of light; unlit, the dark ring sits flush in the plaster with the lamp recessed inside.
This is the 12W version, throwing a wider 36 degree spread at a warm 3000K and giving 1000 lumens, with colour rendering above 90 so furnishings and finishes keep their real tone. The broader beam suits general room lighting where a run of fittings needs to cover a floor evenly, while still holding enough direction to model a space. The black ring reads as a quiet dark point against a pale ceiling, and a UGR below 16 keeps glare low.
The body is die-cast aluminium in matt black, made for a recessed fit in a plasterboard ceiling. The LED is integrated and included, rated for 50,000 hours, with a separate driver supplied in the box. It runs at a fixed level without dimming and is rated IP20 for dry indoor rooms.
Specification
| Number of lights |
1 |
| Light source |
Integrated LED, 12W total (COB, 50,000h, driver included) |
| Colour temperature |
3000K (warm white) |
| Lumen output |
1000lm |
| Colour rendering (CRI) |
> 90 |
| Beam angle |
36 degrees |
| Glare rating (UGR) |
< 16 |
| Diameter |
85mm |
| Recess depth |
64mm |
| IP rating |
IP20 |
| Dimmable |
No (on-off switch) |
| Mounting |
Recessed, trimmed ring for plasterboard ceilings |
| Frame / Structure finish |
Matt black die-cast aluminium |
| Materials |
die-cast aluminium |
Downloads
Datasheet
Assembly Instructions
3D Model
Frequently Asked
What kind of light does the Infinity 12W give?
A warm, even wash rather than a tight spot. The 12W COB LED throws a 36 degree beam at 3000K and 1000 lumens, with colour rendering above 90, so it suits general room lighting across a kitchen, hallway or living room.
Does it come ready to fit?
Yes. The LED is integrated and included, rated at 1000 lumens with a 50,000 hour life, and a separate driver comes in the box. There is no bulb to source; it wires to mains and recesses into a plasterboard ceiling.
Can it be dimmed?
No. This version runs at a fixed output with a simple on-off switch and is not dimmable, so no dimmer or extra driver is needed on the circuit.
How big is it and where does it suit?
The front ring is 85mm across and it recesses about 64mm deep. The matt black ring and 36 degree spread suit general lighting in a kitchen, hallway or living room where a darker fitting is preferred against the ceiling.