Description
The Hima LED is a recessed round downlight that drops into the ceiling to throw 3670 lumens of neutral 4000K light through a 45 degree beam. Drawing 33W at 220 to 240V AC, it runs at 111 lm/W, so the output is strong for the power used. The tighter 45 degree spread keeps the light directional rather than washing the whole room, which suits it to pooled, focused illumination. North American buyers shopping for a recessed can light of this size will find it fills the same role, set flush into the ceiling void.
Around 12 m² is a sensible single-fitting coverage figure at general lighting levels, so larger rooms benefit from several units spaced across the ceiling to even out the pools of light. The neutral 4000K tone reads as clean and crisp rather than warm, which works well in kitchens, hallways, utility rooms and home offices where clarity matters. With a Ra 90 colour rendering, surfaces, finishes and food look natural under it. Plan the spacing around the 45 degree beam, since the narrower angle means each fitting lights a more defined area directly below it.
Built with an aluminium alloy body in a white finish, the Hima measures 190 mm across and sits 150 mm deep, so check the ceiling void allows that depth before cutting. It carries an IP20 rating, which makes it a dry indoor fitting only, so keep it out of bathrooms, porches and any damp or outdoor location. This version is not dimmable, running at a fixed output, and is rated for 30,000 hours of use. It mounts recessed into the ceiling on its spring clips. The Hima range includes other wattages if you need a different output for the same look.
Specification
| Power |
33W |
| Voltage |
220-240 AC |
| Luminous flux |
3670 lm |
| Efficiency |
111 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 90 |
| Beam angle |
45° |
| IP rating |
IP20 |
| Dimmable |
No |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
30,000 hours |
| Shape |
Round |
| Dimensions |
Ø190 × 150 mm |
| Weight |
988 g |
| Material |
Aluminium Alloy |
| Finish |
White |
Downloads
Frequently Asked
What size cut-out does the Hima downlight need?
The fitting itself measures 190 mm in diameter, so you should make the cut-out hole slightly smaller than this so the trim edge covers the opening. Always check the supplied template against the recess, as the cut-out is distinct from the overall trim diameter. Allow 150 mm of clear depth in the ceiling void for the body.
Is the Hima downlight dimmable?
No, this version runs at a fixed 33W output and is not dimmable. If you want adjustable brightness in the room, consider grouping fittings on separate switched circuits instead. Pairing a non-dimmable fitting with a dimmer switch can cause flicker, so it is best avoided.
How many will I need for a room?
Each fitting covers around 12 m² at general lighting levels, so a typical room takes several units spaced evenly across the ceiling. The 45 degree beam is fairly directional, so closer spacing gives a more even result and avoids dark gaps between the pools. Plan the layout around the room shape and furniture below.
How do I clean the Hima downlight?
Wipe the white trim and lens with a soft, dry or slightly damp cloth once the fitting is switched off and cool. Avoid solvents or abrasive cleaners, which can mark the painted aluminium finish. A gentle wipe now and then keeps dust off the lens so the full 3670 lumen output reaches the room.