Description
A shallow disc of steel finished in polished chrome, this is the piece that turns a set of separate pendants into one arrangement. Nine holes are spaced across a face measuring 60cm, so flexes can drop in a grouped pattern rather than singly, and the plate itself sits barely proud of the ceiling line so the emphasis stays on the shades below. It is non-electrical, with no lamp holder and no wiring of its own. We think of it as the quiet part of a scheme, the bit nobody looks at once the pendants are hanging.
A plate of this size suits a long dining table, a kitchen island, or a hall and stairwell where drops are set at staggered lengths. We reach for one where a cluster is wanted but there is a single ceiling point to work from, and it earns its keep in cafes and shop interiors too, where a grouped arrangement reads better than a row of separate fittings. It suits anyone assembling their own cluster from individual pendants, choosing the shades, the flex and the length of each drop, rather than buying a ready-made multi-light fitting off the shelf.
The body is stainless steel, polished to a bright chrome that picks up light from whatever hangs beneath it. Fingermarks do show on a mirror surface, so we would keep a soft dry cloth to hand and give it the occasional wipe; scouring pads and solvent cleaners take the shine off permanently and are best kept well away. It carries a one year warranty. From the same range we stock metal cable grip kits in matching polished chrome, along with compression cord grips in black, clear and white, so the flexes above the plate can be gathered and held at the drop you want. Pendants are bought separately.
Specification
| Colour |
Polished Chrome |
| Ceiling Mountable |
Yes |
| Weight |
3.00KG |
| Diameter |
600mm |
| Height |
25mm |
| Materials Used |
Iron |
| Energy Class |
Not Applicable |
| Lamp Cap |
Non-Electric |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
How many pendants can it hold?
There are nine holes, so it is intended for up to nine separate drops. You can use fewer if you prefer a sparser arrangement, though unused holes will be visible.
What are the dimensions?
It is 600mm across and just 25mm deep, so it reads as a flat disc against the ceiling rather than a raised housing.
Is it an electrical fitting?
No. It is a non-electrical accessory with no lamp holder and no internal wiring. All lamps and lamp holders belong to the pendants you hang through it.
What is it made of?
Stainless steel, finished in polished chrome. It weighs 3kg.
How should I clean the chrome?
A soft dry cloth for everyday marks, and a barely damp cloth followed by an immediate dry buff if something has splashed it. Avoid abrasives, bleach and solvent-based sprays.
Can I match the flex grips to the finish?
Yes. We stock the metal cable grip kits in polished chrome, which sit alongside this plate without a change of tone.