Description
This recessed downlight is a fixed, square ceiling fitting that takes a single GU10 twist-lock lamp, which is supplied separately and not included. It drops neatly into a 75mm ceiling cut-out for a flush, low-profile finish, with the GU10 sitting in a fixed position behind a clean square trim. With a compact footprint of 88 x 88 x 48 mm, the housing suits both new ceilings and retrofit work where a tidy square aperture is wanted.
The fitting is rated IP20, so it is for dry indoor ceilings only and should be kept clear of bathrooms, porches and any exposed location. It works well across hallways, landings, kitchens, living rooms and offices, set out in a grid or a run to give general or accent light once a GU10 lamp is fitted. The square trim sits within the Glozo range of recessed downlights, making it straightforward to keep a consistent look across a room or scheme.
Built from aluminium alloy in a black finish, the body offers good heat dissipation and a durable trim around the aperture. It accepts a GU10 lamp up to a maximum of 10W in a fixed, non-tilting orientation, with the spring clips holding it firm against the ceiling face once pushed up through the cut-out. The lamp is purchased separately, and dimming will depend on the bulb you choose.
Specification
| Fitting type |
Recessed downlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Fixed |
| Cut-out |
75mm cut-out |
| Max lamp wattage |
max 10W |
| IP rating |
IP20 |
| Material |
Aluminium Alloy |
| Colour / finish |
Black |
| Dimensions |
88 × 88 × 48 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Is a bulb included with this downlight?
No, the fitting is supplied without a lamp. It accepts a separate GU10 twist-lock bulb rated up to a maximum of 10W, which you buy to suit the brightness and tone you want.
What size cut-out do I need?
The fitting requires a 75mm ceiling cut-out. It drops into the hole and is held in place by spring clips against the ceiling face, sitting flush within the square trim.
Can it be used in a bathroom or outdoors?
No. This downlight is rated IP20, which means it is for dry indoor use only. It should be kept clear of bathrooms, exposed porches and any damp or outdoor location.
Can the downlight be angled or tilted?
No, this is a fixed-position fitting, so the GU10 lamp points straight down. If you need an adjustable head to aim light at a wall or feature, choose an adjustable spotlight instead.
Downloads
Product Specification Sheet
Range Datasheet