Description
This recessed downlight is a fixed round fitting that takes a single GU10 twist-lock lamp, which is supplied separately and is not included. The aluminium alloy housing measures Ø89 mm and sits flush once installed, giving a neat, low-profile finish in the ceiling. It is built to hold lamps up to 10W, so it pairs with a standard GU10 LED of your choice.
The downlight recesses into a 75mm cut-out in the ceiling, dropping in behind a sprung clip arrangement so the trim sits tight against the surface. The position is fixed rather than tilting, which makes it well suited to even, regular grids of light across a kitchen, hallway, landing or living space where a uniform layout is wanted. Plan the cut-out spacing in advance so the round trims line up cleanly.
The body is aluminium alloy and the fitting carries an IP20 rating, so it is for dry indoor rooms only and should be kept clear of bathroom zones, porches and any exposed location. It is offered from the Glozo range in two finishes, white and black, to match the ceiling or contrast against it. Whether the downlight can be dimmed depends entirely on the GU10 lamp you fit, so check the bulb's own specification.
Specification
| Fitting type |
Recessed downlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Fixed |
| Cut-out |
75mm cut-out |
| Max lamp wattage |
max 10W |
| IP rating |
IP20 |
| Material |
Aluminium Alloy |
| Colour / finish |
White / Black |
| Dimensions |
Ø89 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Is a bulb included?
No, the downlight is supplied as a fitting only without a lamp. It accepts a single GU10 twist-lock bulb, which you choose and buy separately.
What size cut-out does it need?
It needs a 75mm cut-out in the ceiling. The fitting recesses into the hole and the round trim sits flush against the ceiling face once installed.
Can it be used in a bathroom or outdoors?
No. It is rated IP20, which means dry indoor use only, so keep it out of bathroom shower zones, porches and any exposed or damp location.
What is the maximum lamp wattage?
The fitting takes a GU10 lamp up to a maximum of 10W. Choose a GU10 LED within that limit; whether it dims depends on the lamp you select.
Downloads
Product Specification Sheet
Range Datasheet