Description
This recessed downlight is a fixed ceiling fitting that takes a separate GU10 twist-lock lamp, which is not included. It sits flush in the ceiling and provides a neat, low-profile finish for general and accent lighting around the home. The output, tone and spread come entirely from the GU10 lamp you choose, so you can match the look to each room.
It drops into a standard 70mm ceiling cut-out, with an overall trim of Ø98 mm and a 44 mm body depth that suits most domestic ceiling voids. The round trim works well in rows across kitchens, hallways and living spaces, and is rated for lamps up to 10W. With an IP20 rating it is intended for dry indoor positions only, so keep it clear of bathroom zones and any sheltered outdoor areas.
The body is aluminium alloy in a White/Anthracite finish, giving a clean fixed bezel that holds the GU10 lamp securely in place once twisted home. Installation is straightforward into a prepared 70mm cut-out, with the spring clips gripping the ceiling board. Whether dimming is possible depends on the GU10 lamp fitted, so check the lamp specification when you select it.
Specification
| Fitting type |
Recessed downlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Fixed |
| Cut-out |
70mm cut-out |
| Max lamp wattage |
max 10W |
| IP rating |
IP20 |
| Material |
Aluminium Alloy |
| Colour / finish |
White/Anthracite |
| Dimensions |
Ø98 × 44 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Is a bulb included?
No, the fitting is supplied without a lamp. It accepts a separate GU10 twist-lock bulb, which you choose and buy to suit the room.
What size cut-out do I need?
It requires a 70mm cut-out in the ceiling. The overall trim is Ø98 mm, so allow space around the hole for the bezel to sit flush against the surface.
Can it be used in a bathroom or outdoors?
No. This downlight is rated IP20 for dry indoor use only, so it should be kept clear of bathroom shower zones and any outdoor or damp locations.
Is the downlight adjustable or fixed?
It is a fixed-position fitting, directing light straight down. The aluminium alloy body holds a GU10 lamp up to a maximum of 10W.
Downloads
Product Specification Sheet
Range Datasheet