Description
This recessed downlight is a fixed ceiling fitting that accepts a single GU10 twist-lock lamp, which is not included. It drops into a 75mm cut-out and sits flush against the ceiling for a neat, unobtrusive finish. The position is fixed rather than tiltable, so the lamp aims straight down, making it a straightforward choice for an even run of ceiling points.
The round form takes a standard GU10 bulb rated up to 10W, so you can match the brightness and tone to the room by choosing the lamp to suit. Built from aluminium alloy with a clean white finish, it measures Ø89 mm overall and recesses into the 75mm hole. From the Glozo range, it suits hallways, kitchens, living rooms and similar indoor spaces where a discreet recessed point is wanted.
Carrying an IP20 rating, this fitting is for dry indoor locations only and should be kept clear of bathrooms and exposed outdoor positions. Install it into a suitable ceiling void with the cut-out cleared to size, then fit your chosen GU10 lamp via the twist-lock holder. The white aluminium alloy body keeps the trim low-profile against a painted or plastered ceiling.
Specification
| Fitting type |
Recessed downlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Fixed |
| Cut-out |
75mm cut-out |
| Max lamp wattage |
max 10W |
| IP rating |
IP20 |
| Material |
Aluminium Alloy |
| Colour / finish |
White |
| Dimensions |
Ø89 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Does this downlight come with a bulb?
No, the fitting is supplied without a lamp. It accepts a single GU10 twist-lock bulb of up to 10W, which is purchased separately so you can pick the brightness and tone you prefer.
What size cut-out do I need?
The downlight is designed for a 75mm cut-out. Clear the hole to that diameter in a suitable ceiling void and the fitting recesses in flush, with an overall trim diameter of Ø89 mm.
Can it be used in a bathroom or outdoors?
No. This fitting is rated IP20, so it is for dry indoor locations only. Keep it clear of bathrooms, porches and any position exposed to moisture or weather.
How do I clean and maintain it?
Switch off and allow the lamp to cool, then wipe the white trim with a soft, dry or slightly damp cloth. Avoid abrasive cleaners on the aluminium alloy finish, and never use water near the recessed housing.
Downloads
Product Specification Sheet
Range Datasheet