Description
Gosmelle is a set of three round LED downlights that sit almost flush with the ceiling, each with a brushed satin nickel bezel framing a white diffuser. Each light measures 8.8cm across, fits a 7.5cm cut-out and needs only 4cm of recess depth, so a shallow ceiling void is enough. The LEDs are integrated, drawing 3.7W per light and giving 450lm each, so there are no bulbs to buy or change. The rating is IP20, which settles where they belong: indoors, in dry rooms.
We would put this set in a living room, hallway, bedroom or study, where a few small points of light across the ceiling give an even spread without anything hanging into the room. Three colour temperatures are chosen at the light: 2700K for a warm, relaxed evening glow, 4000K for a crisper neutral white, and 6500K for a bright, daylight-like light where you read or work. That choice means the same downlight can match the mood of a lounge or the clarity a home office needs. Because the lights are not dimmable, pair them with a standard wall switch rather than a dimmer.
The body is plastic in a satin nickel finish, brushed in fine circular lines, and the white plastic diffuser spreads the LEDs into a soft, even disc of light. There is no switch on the light itself: it is switched at the wall, while the colour temperature is chosen at the light. The set runs on 220-240V mains and carries energy class E. As a wired-in mains light, it is installed by a qualified electrician, and the installation instructions come as a PDF download. Measure your ceiling before you order: each hole needs to be 7.5cm across, with 4cm of clear depth.
Specification
| Diameter |
8.8cm |
| Body Material |
Plastic |
| Body Colour |
Satin nickel |
| Shade Material |
Plastic |
| Shade Colour |
White |
| Light Source |
LED, integrated |
| Wattage |
3 x 3.7W |
| Lumens |
450lm per light (3 lights) |
| Colour Temperature |
2700K, 4000K, 6500K |
| Dimmable |
No |
| Features |
Three colour temperatures, chosen at the light |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
E |
| Recess Depth |
4cm |
| Cut-Out |
7.5cm |
| Weight (packed) |
0.39KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can these downlights go in a bathroom?
No. They are rated IP20, which means indoors and dry, so we suggest living rooms, hallways, bedrooms and studies rather than bathrooms or anywhere near water.
What size hole do they need?
Each downlight needs a 7.5cm cut-out and 4cm of recess depth, and the satin nickel bezel measures 8.8cm across once it is fitted.
Can I change the colour of the light?
Yes, each light offers three colour temperatures, chosen at the light itself: a warm 2700K, a neutral 4000K and a bright 6500K daylight white.
Are they dimmable?
No, these downlights are not dimmable, so they run from a standard wall switch, and there is no switch on the light itself.
How bright is each light?
Each of the three integrated LED lights draws 3.7W and gives 450lm, and because the LEDs are built in there is no bulb to replace.