Description
The Game is a compact recessed downlight that sits almost flush in the ceiling and puts a warm, contained pool of light straight down. It is built around an integrated LED behind a die-cast aluminium ring, finished matt white so the trim reads as a quiet circle against a plaster ceiling. At only 58mm across it is one of the smallest heads in the range, made to be set in a run for even coverage or used singly to pick out a spot below.
The LED is fixed at a warm 3000K and throws a 36 degree beam of about 650 lumens, with a colour rendering above 90, so skin, timber and paint hold their real tone under it. The all-white ring and reflector keep the fitting recessive by day; lit, the source is set back in the die-cast body to soften glare when you look up at it. This makes it a clean general downlight for a hallway, a landing or a bathroom ceiling where the light needs to disappear into the plane.
The LED is built in and rated to 50,000 hours, so there is no bulb to fit or replace. It recesses to 40mm and runs at IP20 for dry indoor rooms. The head is dimmable on a compatible driver, and there is also 1-10V/PUSH or DALI/PUSH drivers separately, which we can supply alongside to set the level across a whole run.
Specification
| Number of lights |
1 |
| Light source |
Integrated LED, 5.5W total (50,000h) |
| Luminous flux |
650 lumens |
| Colour temperature |
3000K (warm white) |
| CRI |
Ra > 90 |
| Beam angle |
36 degrees |
| Diameter |
58mm |
| Height |
40mm (recess depth) |
| IP rating |
IP20 |
| Dimmable |
Yes, with optional 1-10V/PUSH or DALI/PUSH driver |
| Frame / Structure finish |
Matt white die-cast aluminium (RAL 9001) |
| Diffuser / Reflector |
Matt white reflector |
| Materials |
Die-cast aluminium |
Downloads
Datasheet
Assembly Instructions
3D Model
Frequently Asked
What kind of light does the Game downlight give?
A warm, contained downward pool. The integrated LED runs at 3000K over a 36 degree beam, about 650 lumens, with a colour rendering above 90, so it works as even general light across a ceiling.
Does it use a bulb?
No, the LED is built in and rated to 50,000 hours. There is nothing to fit or replace; the head recesses into the ceiling and wires to a driver.
Is it dimmable?
Yes, on a compatible driver. It works with an optional 1-10V/PUSH or DALI/PUSH driver, sold separately, so the level can be set across a run; there is no driver built into the fitting.
How big is it and where does it suit?
The ring is 58mm across and recesses 40mm into the ceiling. Rated IP20, it suits a hallway, landing, bedroom or bathroom ceiling, set in a row for even cover or used singly over a spot.