Galoba 780x80 4 x GU10 Ceiling Light - Black

The Galoba is a four-head led ceiling light built on a slim 780 by 80 mm bar, holding four GU10 lamps that each draw up to 35W. As a flush mount led ceiling light it sits close against the ceiling line rather than hanging, while the individual heads can be angled to point light where it is needed. It runs on a standard 220-240V AC mains supply and uses PAR16 GU10 lamps, so the exact lumen output and colour temperature follow whichever bulbs you fit.

The linear bar format suits hallways, kitchen runs, home offices and living spaces where directional light beats a single fixed glow. Because the four spots tilt independently, you can wash a worktop, pick out a picture wall and lift a seating corner from one fitting. It is rated IP20 for dry indoor rooms only, so keep it clear of bathrooms, porches and any damp or outdoor setting. On standard ceilings the 780mm length spreads the four beams along a room rather than stacking them in one pool, which makes it a tidy choice for narrower or longer spaces.

The body is aluminium alloy in a black finish, with the four GU10 holders set along the bar. Each head adjusts on its mount so the throw can be fine-tuned after fitting. The fixture mounts to a wall or ceiling on the supplied bracket, wired direct to mains with no transformer needed. Dimming depends on the GU10 lamps chosen, since the fitting itself carries no integrated driver. We also stock other formats in the Galoba range if you need a shorter or longer bar.

What room size does this light suit?

With four GU10 spots along a 780mm bar, the Galoba works well in hallways, kitchens, home offices and medium living spaces. Because each head angles separately, it covers a longer or narrower room more evenly than a single central fitting. Final brightness depends on the GU10 lamps you fit.

Can this fitting be dimmed?

The Galoba has no integrated driver, so dimming is set by the GU10 lamps you install. Fit dimmable GU10 bulbs on a compatible dimmer switch to dim it, or standard GU10 lamps for fixed output. Check the bulb packaging confirms dimmable before pairing with a dimmer.

Does it take replaceable bulbs?

Yes. The fitting uses four GU10 (PAR16) lamps rated up to 35W each, so you choose the wattage, colour temperature and beam to suit the room. Replacing a single lamp is straightforward without changing the whole fitting.

How do I clean it?

Switch off and let the lamps cool, then wipe the aluminium bar and heads with a dry or barely damp soft cloth. Avoid solvents and abrasive cleaners on the black finish, and keep moisture away from the GU10 holders. As an IP20 fitting it is for dry indoor rooms only.