FL AGOR PRO 200W LED Floodlight 110 deg Cool White - Black

The FL AGOR PRO is a 200W LED floodlight built for large-area outdoor lighting. It pushes out 28000 lumens at an efficiency of 140 lm/W, with a 4000K cool white tone that reads as a crisp, neutral daylight rather than a yellow cast. The wide 110° beam angle spreads that output across a broad arc rather than concentrating it into a narrow throw, so the coverage stays even across the lit zone. In US terms a fitting of this kind is what you would search for as an LED flood, and at 28000 lumens it sits firmly in the high-output bracket.

With this much output the AGOR PRO suits big spaces that need flat, shadow-free coverage: car parks, yards, loading bays, warehouse forecourts, sports and storage areas, and building façades. The 110° beam favours mounting at height on a wall or pole so the wide spread can wash down and across the ground from above. As a guide on replacement, an old halogen flood at roughly 20 lumens per watt would need around 1400W to match this fitting, so it does the work of a bank of halogen heads while drawing 200W. Throw and spread scale with mounting height, so raising the head lifts the coverage footprint accordingly.

The body is metal in a black finish, rated IP65 so it is sealed against dust and water jets and safe for fully exposed outdoor and wet locations. An IK08 rating gives it solid resistance to knocks in working environments. It runs directly from 220-240V AC mains and is not dimmable, so it is intended for on/off duty on its circuit or a timer/sensor feed. Rated lifespan is 50,000 hours and the head can be ceiling or wall mounted via its adjustable bracket. The AGOR PRO sits within our wider Kanlux floodlight range in several wattages for matching schemes across a site.

How bright is the FL AGOR PRO and what does it replace?

It produces 28000 lumens from 200W, with an efficiency of 140 lm/W. Against an old halogen floodlight at around 20 lumens per watt, that output is roughly equivalent to a 1400W halogen unit, so a single AGOR PRO can stand in for several traditional heads while drawing a fraction of the power.

Can it be used fully outdoors in wet weather?

Yes. It carries an IP65 rating, which means it is sealed against dust ingress and low-pressure water jets, making it suitable for exposed outdoor and wet locations such as yards, car parks and building exteriors. The IK08 rating also gives it good resistance to impacts in busy working areas.

How much area does it cover and how far does it throw?

The wide 110° beam angle spreads light across a broad arc rather than focusing it into a long, narrow throw, giving even coverage across the lit zone. The footprint scales with mounting height, so fitting it higher on a wall or pole widens the area it washes. It works best where you want flat, shadow-free coverage over a large open space.

How do I clean and maintain it?

Wipe the front lens and housing with a soft, damp cloth once the unit is switched off and cool, avoiding abrasive cleaners that could mark the finish or scratch the lens. Keeping the lens clear of dust, leaves and grime preserves the full light output. Check the IP65 seal and mounting bracket periodically on exposed installations.