FL AGOR HI 300W LED Floodlight 90 deg Cool White - Black

The FL AGOR HI is a 300W LED floodlight built for large-area outdoor lighting, putting out 45,000 lumens at a cool white 4000K from a single sealed head. Its 90° beam spreads a wide, even wash rather than a tight throw, lighting up broad surfaces directly in front of the fitting. Buyers in the US will know this style of high-output fixture as an LED flood or area light, the workhorse used to cover yards, lots and building frontages.

On the throw side, 45,000 lumens at 300W (150 lm/W) is serious output, enough to light a forecourt, loading bay, sports area or warehouse exterior to a clear working brightness across a wide footprint. As a guide to scale, that lumen package sits in the territory once handled by an old 1500W halogen flood, computed at roughly 20 lumens per watt. Mount it high on a wall, eaves or pole to push the 90° spread out and down across the space below. It is not ambient room lighting, so treat coverage as wide-area floodwash rather than a measured room figure.

The body is aluminium alloy in a black finish, rated IP65 for full weatherproofing in exposed outdoor and wet locations and IK08 for impact resistance. It mounts to a wall, ceiling or other surface via the integrated bracket and weighs 10.44 kg, so fix it to a solid substrate. The LEDs are integrated with a rated 50,000 hour life, and this model is not dimmable. We stock the wider FL AGOR HI range in further wattages for matching larger sites.

How bright is this floodlight?

It produces 45,000 lumens from 300W, giving an efficiency of 150 lm/W at a cool white 4000K. That is enough to light a large forecourt, yard or building exterior to a clear working brightness.

What halogen wattage does it replace?

At 45,000 lumens it is roughly equivalent to an old 1500W halogen floodlight, since a traditional halogen flood managed only around 20 lumens per watt. You get the same wide spread of light for a fraction of the running cost.

Can it be used outdoors in the rain?

Yes. It carries an IP65 rating, which makes it fully weatherproof and suitable for exposed outdoor and wet locations. The IK08 rating also gives it solid impact resistance.

How should I clean it?

Switch off the supply and let the fitting cool, then wipe the lens and aluminium housing with a soft, damp cloth. Avoid solvents or abrasive pads so the finish and the lens stay clear and the IP seal is not disturbed.