FL Agor/A Pro 200W LED Floodlight 12565 deg Cool White - Black

The Agor/A Pro is a 200W LED floodlight built for large outdoor areas. It draws from a 220-240V AC supply and delivers 27000 lumens at 135 lm/W, giving a high, even wash of cool white 4000K light. The beam is asymmetric at 125 deg by 65 deg, spreading light wide and forward rather than throwing a tight spot, which suits broad surfaces over distance. American buyers will recognise this format as an outdoor LED flood or area light, the kind of fitting mounted high to cover a working space.

Output at this level replaces a large halogen flood several times over. At roughly 20 lumens per watt for an old halogen unit, the 27000 lumen output here is in the region of a 1350W halogen floodlight, so a single Agor/A Pro covers what once took multiple older fittings. The wide 125 deg by 65 deg spread throws light across car parks, loading bays, yards, sports areas and building facades, and the forward bias means it can be angled to graze a wall or illuminate a forecourt without heavy spill behind. Mount it high on a wall or under a soffit to widen the coverage and reduce glare at ground level.

The housing is metal in a black finish, rated IP65 for full weatherproofing against rain and wind-driven water and IK08 for impact resistance, so it stands up to exposed positions. It mounts to a wall or ceiling on its adjustable bracket, letting the beam be tilted to the target area. The unit is not dimmable and is rated for 50,000 hours of service. It weighs 4.10 kg, so fix it to a sound substrate. This sits within our wider Fl floodlight range, which spans lower wattages for smaller sites.

How bright is this floodlight?

It produces 27000 lumens at 200W, an efficiency of 135 lm/W. That is a high output suited to large open spaces such as car parks, yards and sports areas where broad, even coverage matters.

What halogen floodlight does it replace?

At around 20 lumens per watt for an old halogen flood, the 27000 lumen output here is roughly equivalent to a 1350W halogen unit. One Agor/A Pro therefore does the work of several older fittings while drawing only 200W.

Can it be used outdoors in wet weather?

Yes. It carries an IP65 rating, so it is fully weatherproof against rain and wind-driven water and is suitable for fully exposed outdoor positions. The IK08 rating also gives it solid resistance to knocks and impact.

How do I clean and maintain it?

Switch off the supply, let the unit cool, then wipe the lens and metal housing with a soft damp cloth and a mild detergent. Avoid abrasive cleaners that could scratch the lens, and check the bracket fixings periodically so the beam stays aimed where you need it.