Description
The FL AGOR/A PRO is a 100W LED floodlight delivering 13500 lumens at 4000K cool white, giving a bright, neutral output suited to security and area lighting. Its asymmetric beam of 125 deg x 65 deg spreads light wide and low across a surface rather than punching it into a tight spot, which is why it carries the 12565 deg label. North American buyers will know this format as an outdoor LED flood light or security light, doing the same job as a traditional halogen floodlight at a fraction of the power draw.
At 13500 lumens this unit produces roughly the brightness of an old 675W halogen floodlight, working out at about 135 lumens per watt. It throws a broad, even wash that covers a driveway, yard, loading bay or building elevation, with the wide horizontal beam favouring coverage across the ground over long-distance throw. Mounted on a wall, ceiling or other surface at typical fixing heights, it suits car parks, workshops, gardens and the perimeter of commercial or industrial buildings where a dependable flood of light is needed.
The body is metal with a black finish, rated IP65 for full weatherproofing against rain and dust and IK08 for impact resistance, so it copes with exposed outdoor and wet locations. It runs on 220 to 240V AC mains and is surface mounted via its integral bracket, with a rated lifespan of 50000 hours. This fitting is not dimmable. We stock the FL AGOR/A PRO across several wattages, so a matching set can be specified for a larger site.
Specification
| Power |
100W |
| Voltage |
220-240 AC |
| Luminous flux |
13500 lm |
| Efficiency |
135 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
X125/Y65° |
| IP rating |
IP65 |
| IK rating |
IK08 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted, Surface Mounted |
| Lifespan |
50,000 hours |
| Weight |
1.99 kg |
| Material |
Metal |
| Finish |
Black |
Downloads
Frequently Asked
How bright is this floodlight?
It produces 13500 lumens from 100W at 135 lumens per watt, in a neutral 4000K cool white. That is enough to light a driveway, yard or building frontage clearly.
What halogen wattage does it replace?
At 13500 lumens it gives about the same light as an old 675W halogen floodlight, since traditional halogen flood units managed roughly 20 lumens per watt. It does so on just 100W, cutting running costs sharply.
Can it be used outdoors in the rain?
Yes. It is rated IP65, which means it is fully protected against dust and low-pressure water jets, so it is suitable for exposed outdoor and wet locations. The IK08 rating also gives it good impact resistance.
How do I clean it?
Switch off the power and let the fitting cool, then wipe the lens and metal housing with a soft damp cloth. Avoid abrasive cleaners or high-pressure washers directed straight at the unit, as these can mark the lens over time.