Description
The Fizu is a compact round recessed downlight that drops neatly into a ceiling and throws a tight, focused light. It draws 4.8W and runs from a standard 220-240V AC mains supply, with a 36 degree beam that keeps the output controlled rather than washing the whole room. The colour temperature is a fixed 4000K cool white, a clean neutral tone that reads bright and crisp. US buyers will recognise this format as a small recessed can light, sized to sit flush in the ceiling line. At just Ø80mm across and 32mm deep, it suits tight plenum depths and slim ceiling voids.
The fitting works well in kitchens, hallways, utility rooms and bathroom zones, used in a row to mark a route or pick out a worktop, alcove or shelf. With a narrow 36 degree beam each unit delivers an accent or task pool rather than broad ambient fill, so plan several across a ceiling for even coverage and space them to overlap their pools. The IP44 rating means it is splash-resistant and suited to sheltered, covered spots such as a porch or carport ceiling and to the appropriate bathroom zones, though it should be kept clear of direct water jets and fully-exposed positions.
The body is moulded plastic in a black finish, weighing only 74g, and mounts recessed into the ceiling via a cut-out. It is not dimmable, so pair it with a standard non-dimmed circuit. The CRI of Ra 80 gives accurate enough colour for general and task use, and the rated lifespan is 25,000 hours. The fixed 4000K output keeps a consistent cool white across a run of fittings. The Fizu range includes further finishes and outputs to match across a scheme.
Specification
| Power |
4.8W |
| Voltage |
220-240 AC |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
36° |
| IP rating |
IP44/20 |
| Dimmable |
No |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
25,000 hours |
| Shape |
Round |
| Dimensions |
Ø80 × 32 mm |
| Weight |
74 g |
| Material |
Plastic |
| Finish |
Black |
Downloads
Frequently Asked
What cut-out size does it need?
The fitting is Ø80mm overall and recesses into the ceiling, so cut the hole to suit that body diameter rather than the visible trim. Always confirm the cut-out against the supplied template before drilling, and check there is at least 32mm of clearance in the void behind.
Is the Fizu downlight dimmable?
No, this version is not dimmable, so it should be wired to a standard non-dimmed lighting circuit. Fitting a dimmer to a non-dimmable LED can cause flicker or shorten its life.
Can it be used in a bathroom?
Yes, the IP44 rating makes it splash-resistant and suitable for the appropriate bathroom zones and for sheltered covered areas such as a porch ceiling. It should not be used in fully-exposed outdoor positions or anywhere exposed to direct water jets.
How do I clean it?
Wipe the visible black trim with a soft, dry or barely-damp cloth once the fitting is switched off and cool. Avoid solvents or abrasive cleaners on the plastic, as these can dull the finish over time.