FIZU 8W Round LED Downlight IP44 Cool White - White

The FIZU is a compact round LED downlight that recesses neatly into the ceiling, drawing 4.8W and running directly from 220-240V AC mains. It puts out a crisp 4000K cool white tone with a tight 36 degree beam, so the light falls in a controlled pool rather than washing flat across the surface. With an 80mm overall diameter it sits flush and discreet once installed. American buyers will recognise this format as a small recessed can light, the integrated equivalent of a trimmed downlight rather than a lamp holder.

The narrow beam and cool tone make the FIZU well suited to task and accent positions: above a bathroom basin, along a hallway, or picking out a kitchen worktop run. Several fittings spaced evenly across a ceiling build up even coverage, and the focused 36 degree spread means each unit lights a defined zone directly beneath it rather than spilling sideways. It works on standard domestic ceiling heights, where the close beam keeps glare down while still reaching the floor or counter cleanly.

The body is moulded plastic with a white finish, and the fitting carries an IP44 rating on the face, so it is rated for splash and sheltered locations such as bathroom ceilings and covered porches or carports. Keep it clear of fully exposed positions, direct water jets and submersion. The integrated LED is rated for 25,000 hours and the downlight is not dimmable, so pair it with a standard non-dimming circuit. It recesses into the ceiling cut-out and weighs just 74g. The FIZU range includes other wattage and colour-temperature options to match across a scheme.

What size cut-out does the FIZU need?

The fitting has an overall diameter of 80mm, so it drops into a slightly smaller circular cut-out in the ceiling. Always confirm the exact hole size against the supplied template before cutting, as the cut-out is smaller than the visible trim diameter.

Is the FIZU downlight dimmable?

No, this version is not dimmable and should be wired to a standard non-dimming circuit. Fitting it with a dimmer switch may cause flicker or shorten the LED lifespan, so use a plain on/off control.

Can it be used in a bathroom?

Yes, the IP44 rating makes it suitable for bathroom ceilings and the appropriate splash zones, as well as covered outdoor spots like a porch. It is not rated for fully exposed positions, direct water jets or any submersion.

How do I clean the downlight?

Wipe the visible white trim with a soft, dry or lightly damp cloth once the fitting is switched off and cool. Avoid solvents or abrasive cleaners, which can mark the plastic finish over time.