Description
The Fizu is a compact recessed LED downlight that drops neatly into the ceiling for discreet accent and detail lighting. It draws just 4W to deliver 370 lumens, giving a focused 40 degree beam that picks out a feature or layers light into a wider scheme rather than flooding a whole room. The colour temperature is selectable across 3000K warm white, 4000K neutral white and 6500K cool white, so the same fitting can read cosy in a living space or crisp in a work area. North American buyers will recognise this format as a small recessed can light, sized for a tight trim and a clean ceiling line.
This small downlight suits hallways, alcoves, shelving recesses and tight ceiling voids where a slim 80mm round fitting is needed. At general lighting levels a single unit covers around 1 m², so it works best in groups, spaced along a corridor or clustered to wash a feature wall or a run of cabinetry. With a fixed 40 degree beam it is more of a directional accent light than a primary room source, and several together let you build the brightness you want. It is rated IP20 for dry indoor use only, so keep it to living rooms, landings and similar interior ceilings and clear of bathrooms, porches or any damp or exposed position.
The body is plastic with a black finish, measuring 80mm in diameter and 32mm deep, and weighing only 92g. It runs on 220 to 240V AC mains and is recessed into the ceiling, so allow for the cut-out and a little depth above the plasterboard. The fitting is not dimmable, and the LED is integrated with a rated life of 25,000 hours and a colour rendering of Ra 80. The Fizu range includes matching downlights in further sizes and finishes if you are lighting more than one area.
Specification
| Power |
4W |
| Voltage |
220-240 AC |
| Luminous flux |
370 lm |
| Efficiency |
93 lm/W |
| Colour temperature |
3000/4000/6500K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
40° |
| IP rating |
IP20 |
| Dimmable |
No |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
25,000 hours |
| Shape |
Round |
| Dimensions |
Ø80 × 32 mm |
| Weight |
92 g |
| Material |
Plastic |
| Finish |
Black |
Downloads
Frequently Asked
What is the cut-out hole size for this downlight?
The Fizu has an overall trim diameter of 80mm and is recessed into the ceiling, so you will need a slightly smaller cut-out to seat the fitting and clip it in place. Always check the cut-out figure on the spec sheet before drilling. Allow around 32mm of clearance above the ceiling for the body.
Can I change the colour temperature?
Yes, the Fizu is colour selectable between 3000K warm white, 4000K neutral white and 6500K cool white. The setting is chosen at installation, letting you match the tone to the room rather than committing to one fixed colour. This makes it flexible across living spaces and task areas.
How many do I need for a room?
Each fitting gives 370 lumens with a 40 degree beam, covering around 1 m² at general lighting levels, so it is best used in multiples. For a hallway, space several evenly along the run; for accent work, group them over the feature you want to highlight. Calculate the total lumens you need and divide by 370 to estimate the count.
How do I clean the downlight?
Switch off the power and let the fitting cool before cleaning. Wipe the black surface and lens with a soft, dry or slightly damp cloth, avoiding solvents and abrasive cleaners that could mark the plastic. Because it is IP20 rated, keep moisture away and never use a wet cloth on a live fitting.