Description
This is a golf ball bulb with a B22 bayonet cap, the push and twist fitting with two pins that is the most common cap on British light fittings. It draws 4W and gives 470 lumens at 2,700K, which the pack rates as the equal of a 40W conventional bulb. Four LED filaments run the height of a clear glass sphere, so the light source itself is part of the look rather than something to be hidden behind a shade. The golf ball envelope measures 45mm across at its widest point, as printed on the box.
Golf ball bulbs earn their place where a standard GLS shape would look oversized or simply will not fit: multi arm pendants, small wall lights, bedside lamps, and shades with a narrow opening. The 280 degree beam angle spreads light almost all the way round the bulb rather than pushing it in one direction, so it works in an open fitting as well as a closed one. At 2,700K the light is warm white, close in tone to the old filament bulbs, and it flatters wood, brick and warm paint colours. With the filaments on show, it suits a fitting where the bulb is meant to be seen.
This bulb is not dimmable, so pair it with a standard on and off switch; on a dimmer circuit it may flicker or fail early. The pack prints a life of 10 years or 10,000 hours and more than 8,000 on and off switching cycles, which matters in a hallway or a landing where a light is flicked constantly. It carries energy class E and runs on 220 to 240V mains. Each listing is a single bulb, with a minimum order of 5 sold in multiples of 5. It sits alongside our wider Eveready range of golf, candle and GLS bulbs in bayonet and screw caps.
Specification
| Fitting |
B22 bayonet (BC) |
| Shape |
Golf |
| Technology |
LED filament |
| Wattage |
4W |
| Brightness |
470lm |
| Equivalent |
40W, as printed on the pack |
| Colour temperature |
2,700K warm white |
| Beam angle |
280 degrees |
| Dimmable |
No |
| IP rating |
IP20 |
| Energy rating |
E |
| Lifespan as printed |
10 years / 10,000 hours |
| Sold as |
Single bulb |
| Minimum order |
5, sold in multiples of 5 |
Frequently Asked
Will this fit my bayonet lampholder?
It takes a B22 bayonet cap, the 22mm two pin push and twist fitting. Pull your old bulb out and check it has two small pins on the side of a smooth metal cap rather than a screw thread.
Can I use it on a dimmer switch?
No. The specification gives it as non dimmable, so run it from an ordinary on and off switch. Fitting a non dimmable lamp to a dimmer circuit can cause flicker, buzzing or early failure.
How bright is 4W against an old bulb?
It produces 470 lumens, and the pack gives that as the equal of a 40W conventional bulb. Lumens are the figure to compare on, because watts now only tell you how much power the lamp draws.
What does 2,700K warm white look like in a room?
It is a soft yellow toned white, the tone people remember from traditional filament lamps. It suits living rooms and bedrooms, and reads much warmer than a 4000K or 6500K bulb.
Will it light a room evenly in an open fitting?
The 280 degree beam angle throws light almost the whole way around the bulb, so it fills a shade or an open pendant rather than pushing a narrow cone downwards.
How many bulbs do I receive?
One bulb per unit. The minimum order is 5 units, sold in multiples of 5, so the smallest purchase is five single bulbs.