Eryon LED Large Alabaster Wall Light - Brushed Brass

The Eryon is an 800mm tall alabaster wall light built around two cylindrical columns of natural Spanish alabaster, joined at the centre by a brushed brass and ribbed bronze mount. An integrated 10W LED at 3000K sits concealed within the central housing, casting warm light upward and downward through the stone so the alabaster itself becomes the diffuser. The fitting projects 95mm from the wall on a 60mm-diameter column.

The vertical format suits hallways, stairwells, bedside positions and the flanks of mirrors, fireplaces or doorways where a tall, narrow light reinforces the architecture. Hardwired to a standard wall point, the brass back plate covers the cable entry and fixes through a single point on the wall. The up-and-down light distribution makes the Eryon work as ambient layering rather than directed task light, pairing comfortably with overhead pendants or recessed downlights in the same room.

Each alabaster column is cut from a single block of Spanish stone, so the cloudy veining and tonal variation differ between pieces and become more visible once the LED is switched on. The brushed brass mount carries a finely ribbed bronze sleeve at its centre, giving a textured midpoint that breaks the otherwise smooth vertical run of stone. Combined with the 800mm height and 60mm slim profile, the proportions read as architectural rather than decorative.

Is the Eryon suitable for bathrooms?

The Specification tab does not list an IP rating for this fitting, so the Eryon should be treated as an indoor wall light for dry locations. It is not recommended for bathroom zones 1 or 2, or for areas exposed to splashing water or steam.

Does the alabaster vary between pieces?

Yes. Each column is cut from natural Spanish alabaster, so the veining, cloudy patterning and tonal variation differ between individual pieces. The variation becomes more visible once the integrated LED is switched on and is a feature of the natural stone rather than a defect.

What colour temperature does the LED produce?

The integrated LED runs at 10W and 3000K, which is a warm white commonly described as soft white. It pairs well with the cream and honey tones of the alabaster and brushed brass, giving an ambient rather than clinical light.

How is the alabaster cleaned?

Alabaster is porous and softer than marble. Wipe gently with a dry, soft microfibre cloth, and isolate the wall light at the circuit before cleaning. Avoid household sprays, polishes and chemical cleaners, and do not use a damp cloth that could let water soak into the stone.