Description
The Erga is a 17W round LED downlight that pulls 1400 to 1600 lumens from a single integrated array, giving a clean, even spread across its 120 degree beam. Colour selectable across three tones, it switches between 3000K warm white, 4000K neutral white and 6500K cool white, so the same fitting can read cosy or crisp depending on the room. US buyers will recognise this format as a recessed can light, the round downlight that drops into a ceiling cut-out. At 230mm across and just 36mm deep, it sits flush and unobtrusive once installed, and the wide beam keeps the light soft rather than spotty.
Around 1600 lumens covers roughly 5 m² at general lighting levels, which makes the Erga a sensible single-point fitting for a small hallway, a utility area, a landing or a compact bedroom, with several units spaced out for a larger kitchen or living room. The wide 120 degree spread suits standard domestic ceiling heights and lights the floor below evenly rather than throwing a narrow pool. Being IP20 rated, it is for dry indoor rooms only, so keep it clear of bathrooms, porches and any damp or exposed position. The selectable colour temperature lets you tune warmer light for relaxing spaces and cooler light for task areas.
The body is moulded plastic in a white finish, with the flexible mounting making it equally at home recessed into a ceiling, surface fixed to a ceiling, or wall mounted depending on the layout. It runs directly from 220 to 240V AC and is not dimmable, so pair it with a standard switch rather than a dimmer circuit. CRI is rated at Ra 80 for natural everyday colour, and the LED is rated for 50,000 hours, weighing in at 450g. The Erga range offers further sizes and outputs in the same white finish for matching across a project.
Specification
| Power |
17W |
| Voltage |
220-240 AC |
| Luminous flux |
1400/1600/1550 lm |
| Colour temperature |
3000/4000/6500K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
120° |
| IP rating |
IP20 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted, Recessed Mount In The Ceiling |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø230 × 36 mm |
| Weight |
450 g |
| Material |
Plastic |
| Finish |
White |
Downloads
Frequently Asked
What size cut-out does the Erga need?
When recessed, the fitting drops into a ceiling cut-out, which is smaller than the overall 230mm trim diameter, so always check the installation sheet for the exact hole size before cutting. The trim then sits flush over the opening. The fitting is only 36mm deep, so it suits shallow ceiling voids.
How do I change the colour temperature?
The Erga is colour selectable across 3000K warm white, 4000K neutral white and 6500K cool white. The tone is set on the fitting at install via the selector, rather than from the wall switch. Choose warmer light for living and bedroom spaces and cooler light for kitchens and task areas.
Is the Erga dimmable?
No, this downlight is not dimmable and should be wired to a standard on or off switch rather than a dimmer circuit. Running it on a dimmer can cause flicker or shorten its life. It runs directly from 220 to 240V AC.
How do I clean it?
Switch off and let the fitting cool, then wipe the white plastic face with a soft dry or lightly damp cloth. Avoid solvents and abrasive pads, which can dull the finish. As an IP20 fitting it is for dry indoor rooms only, so keep moisture away from it.