Description
The Erga is a round 17W LED downlight with an integrated light source, delivering between 1400 and 1600 lumens depending on the chosen tone. It is colour selectable across 3000K warm white, 4000K neutral white and 6500K daylight, so the same fitting suits a relaxed living space or a brighter working area. A wide 120 degree beam angle spreads light evenly across the floor below, and the Ra 80 colour rendering keeps everyday colours looking natural. Buyers shopping in the US will know this format as a recessed can light, here in a slim 230mm round profile that drops neatly into a ceiling.
Each fitting covers around 5 m² at general lighting levels, which makes the Erga a practical choice for hallways, bedrooms, kitchens and home offices where a clean ceiling line is wanted. For larger rooms or open-plan areas, several units can be spaced out to build up an even wash of light without dark patches. The fitting is rated IP20, so keep it to dry indoor positions and clear of damp or splash-prone spots. With its low 36mm depth it sits flush once recessed, so standard ceiling voids and lower ceilings are easily accommodated.
Built from plastic with a black finish, the Erga is a non-dimmable fitting rated for 50,000 hours of use, so replacement intervals stay long. It carries flexible mounting options, recessing into the ceiling for a discreet look or surface fixing to a ceiling or wall where there is no void to drop into. At 450g it is light to handle during install, and the round 230mm face gives a tidy, balanced appearance. The Erga range is also offered in other finishes if a different look suits the scheme better.
Specification
| Power |
17W |
| Voltage |
220-240 AC |
| Luminous flux |
1400/1600/1550 lm |
| Colour temperature |
3000/4000/6500K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
120° |
| IP rating |
IP20 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted, Recessed Mount In The Ceiling |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø230 × 36 mm |
| Weight |
450 g |
| Material |
Plastic |
| Finish |
Black |
Downloads
Frequently Asked
Is the Erga downlight dimmable?
No, the Erga is a non-dimmable fitting and should be run on a standard non-dimmed circuit. Pairing it with a dimmer switch can cause flicker or shorten the life of the LED, so it is best avoided.
How do I change the colour temperature?
The Erga is colour selectable across 3000K warm white, 4000K neutral white and 6500K daylight, set using a small switch on the fitting before installation. This lets you match the tone to the room without buying separate models.
Can it be recessed or does it surface mount?
It supports both. The Erga can recess flush into the ceiling for a discreet finish, or be surface mounted to a ceiling or wall where there is no void to drop it into. Its slim 36mm depth helps it sit neatly when recessed.
How do I clean the Erga downlight?
Switch off the power and let the fitting cool, then wipe the face gently with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, which can mark the black plastic surface.