Description
The Energizer 7W LED GLS filament bulb combines a B22 bayonet cap with a clear glass envelope and visible LED filaments that replicate the appearance of traditional tungsten wire. The bulb outputs 806 lumens at 2700K warm white, delivering light equivalent to a 60W incandescent while consuming 7W of power.
Designed for general lighting across living rooms, bedrooms, hallways and table lamps, the bulb fits any standard UK BC/B22 bayonet fitting. The clear glass and exposed filament construction suits both modern pendants where the bulb is visible and traditional shades where a classic bulb profile is needed. The 300-degree beam angle provides omnidirectional light distribution, making it suitable for ceiling fixtures and side-table lamps where light needs to spread in all directions.
The bulb is rated for up to 15,000 hours of use based on typical domestic switching patterns, which translates to approximately 15 years at an average of 3 hours per day. It switches on instantly at full brightness with no warm-up period and produces no flicker. The 60mm diameter and 110mm height match the dimensions of a standard GLS (general lighting service) incandescent bulb, ensuring compatibility with existing lamp holders and shades.
This bulb is non-dimmable and must not be used with dimmer switches or smart dimmers, as this can cause buzzing, flickering or premature failure. The E energy rating reflects the efficiency improvement over halogen and incandescent alternatives.
Specification
| Weight (KG) |
0.04 |
| Width (mm) |
60 |
| Height (mm) |
110 |
| Depth (mm) |
60 |
| Wattage |
7W |
| Lumen |
806 |
| Lamp Shape |
GLS |
| Lamp Base |
BC/B22 |
| Energy Rating |
E |
| Kelvin |
2700K |
| Colour Temperature |
Warm White |
| Dimmable |
No |
| Beam Angle |
300° (approx.) |
| LED or Halogen |
LED |
Frequently Asked
Can this bulb be used with a dimmer switch?
No. This is a non-dimmable LED bulb and must not be fitted to dimmer switches or smart dimmers. Using it with a dimmer will cause buzzing, flickering or early failure. If you need a dimmable B22 filament bulb, search for dimmable variants in the Energizer range.
What colour is the light?
The bulb produces warm white light at 2700K, which gives a soft yellowish tone similar to traditional incandescent bulbs. This colour temperature suits residential interiors and creates a relaxed, warm atmosphere.
How long does the bulb last?
Energizer rates this bulb for up to 15,000 hours of use. At an average of 3 hours per day, that translates to approximately 15 years before the bulb needs replacing.
Will it fit my existing lamp?
If your lamp has a B22 bayonet cap fitting (the standard UK two-pin push-and-twist fitting) and the bulb is not controlled by a dimmer, yes. The 60mm diameter and 110mm height match standard GLS bulb dimensions, so it fits most shades and lamp holders designed for traditional incandescent bulbs.