Description
This is a 5W LED filament bulb with an E27 screw cap and the tall, tapered ST64 teardrop shape that suits open fittings. The glass is tinted gold, so the bulb reads as a warm amber even before it is switched on, and the LED filaments inside sit in a slim upright arrangement that stays part of the look once it is lit. It gives 550 lumens at 2,200K, a deep candle-like warm white rather than the brighter 2700K that most household bulbs use, and the retail pack rates it as a 40W replacement.
Because the filaments are the point of a lamp like this, put it where they can be seen: a pendant hung without a shade, an open cage or lantern, a wall bracket that leaves the glass exposed, or a table lamp with a shallow shade that shows the bulb from below. The 320 degree beam spreads light all round rather than pushing it one way, so it behaves as ambient light in a hallway, over a dining table or in a snug. The amber tint keeps the output low and restful, which suits evening rooms, bars and bedside pendants far better than a room where you need to work.
It is dimmable, so pair it with a trailing-edge LED dimmer and check the dimmer's minimum load: older mains dimmers designed for filament bulbs often need more wattage on the circuit than a single 5W LED can draw. The pack prints a 15 year lifespan based on 15,000 hours of use, and the energy rating is E. Each unit is one bulb in its own box, with a minimum order of 12. It sits alongside our wider range of LED bulbs in B15 (SBC), GU10 and E27 fittings.
Specification
| Fitting |
E27 (ES) screw cap |
| Shape |
ST64 |
| Technology |
LED filament |
| Wattage |
5W |
| Brightness |
550lm |
| Equivalent |
40W, as printed on the pack |
| Colour temperature |
2,200K warm white |
| Beam angle |
320 degrees |
| Dimmable |
Yes |
| Energy rating |
E |
| Lifespan as printed |
15 year lifespan, 15,000 hours |
| Sold as |
Single bulb, boxed |
| Minimum order |
12, sold in multiples of 12 |
Frequently Asked
Which fittings will take this bulb?
Any fitting with an E27 screw socket, also called Edison screw or ES. Unscrew the old bulb and check the cap is a threaded screw roughly 27mm across rather than a two-pin bayonet push and twist.
Will it work on my dimmer switch?
It is dimmable, and a trailing-edge LED dimmer gives the smoothest result. Check the dimmer's minimum load, because a single 5W lamp on a dimmer built for old filament bulbs may flicker or refuse to strike.
How bright is 550 lumens in practice?
The pack calls it a 40W replacement, so think of a traditional 40W bulb. That is comfortable for a pendant over a table or a lamp beside a chair, rather than the only light in a large room.
What does 2,200K look like once it is on?
Much warmer and more amber than a standard 2700K warm white, close to candlelight. Combined with the gold tinted glass it gives a low, golden glow rather than a clean white light.
Is an IP rating given for this bulb?
No. The manufacturer does not state an IP rating, so treat it as a lamp for ordinary dry indoor fittings and nothing more demanding than that.
How many do I receive, and how long should one last?
Each unit is a single boxed bulb, with a minimum order of 12 sold in multiples of 12. The pack prints a 15 year lifespan based on 15,000 hours of use.