Free Delivery on all orders over £99*

E14 to E27 Lamp Socket Converter - 60W Max

£199
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This E14 to E27 lamp socket converter is a thermoplastic adaptor that allows an E27 (Edison screw) bulb to be fitted into an E14 (small Edison screw) lamp holder. The male E14 thread screws into the existing lamp fitting, while the female E27 socket accepts the larger bulb base. The adaptor is rated to 60W maximum load and conforms to BS EN60238.

Designed for situations where an E14 fitting is already installed but an E27 bulb is needed, the converter suits table lamps, wall lights and pendant fittings where changing the entire lamp holder is impractical. The 65mm length extends the bulb position by approximately 6.5cm from the original socket, which may affect shade clearance or bulb visibility depending on the fitting.

The white thermoplastic body is heat-resistant and insulates the connection between the two thread types. At 20g the adaptor adds minimal weight to the bulb assembly, making it suitable for lightweight pendant shades and candle-style wall brackets. The 40mm diameter body fits through most shade apertures designed for E14 candle bulbs, though some narrow apertures may require the shade to sit slightly higher on the adaptor.

Specification
Max. load 60W
Dimensions 65 x 40mmØ
Weight 20g
Frequently Asked

What bulbs can I use with this adaptor?

Any E27 bulb up to 60W maximum. This includes LED, halogen and filament bulbs. The adaptor does not affect bulb compatibility with dimmers — that depends on the bulb itself.

Does it extend the bulb position?

Yes. The adaptor adds 65mm to the overall length between the socket and the top of the bulb. Check that your shade or fitting has clearance for this extra length before installation.

Is it safe for enclosed fittings?

The adaptor conforms to BS EN60238 and is heat-resistant, but enclosed fittings trap more heat than open ones. Use LED bulbs (which run cooler) rather than halogen or filament in fully enclosed shades, and stay well below the 60W rating.

Can it be used outdoors?

No IP rating is specified, so the adaptor is intended for indoor use only. It carries no protection against moisture or dust ingress.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This E14 to E27 lamp socket converter is a thermoplastic adaptor that allows an E27 (Edison screw) bulb to be fitted into an E14 (small Edison screw) lamp holder. The male E14 thread screws into the existing lamp fitting, while the female E27 socket accepts the larger bulb base. The adaptor is rated to 60W maximum load and conforms to BS EN60238.

    Designed for situations where an E14 fitting is already installed but an E27 bulb is needed, the converter suits table lamps, wall lights and pendant fittings where changing the entire lamp holder is impractical. The 65mm length extends the bulb position by approximately 6.5cm from the original socket, which may affect shade clearance or bulb visibility depending on the fitting.

    The white thermoplastic body is heat-resistant and insulates the connection between the two thread types. At 20g the adaptor adds minimal weight to the bulb assembly, making it suitable for lightweight pendant shades and candle-style wall brackets. The 40mm diameter body fits through most shade apertures designed for E14 candle bulbs, though some narrow apertures may require the shade to sit slightly higher on the adaptor.

    Specification
    Max. load 60W
    Dimensions 65 x 40mmØ
    Weight 20g
    Frequently Asked

    What bulbs can I use with this adaptor?

    Any E27 bulb up to 60W maximum. This includes LED, halogen and filament bulbs. The adaptor does not affect bulb compatibility with dimmers — that depends on the bulb itself.

    Does it extend the bulb position?

    Yes. The adaptor adds 65mm to the overall length between the socket and the top of the bulb. Check that your shade or fitting has clearance for this extra length before installation.

    Is it safe for enclosed fittings?

    The adaptor conforms to BS EN60238 and is heat-resistant, but enclosed fittings trap more heat than open ones. Use LED bulbs (which run cooler) rather than halogen or filament in fully enclosed shades, and stay well below the 60W rating.

    Can it be used outdoors?

    No IP rating is specified, so the adaptor is intended for indoor use only. It carries no protection against moisture or dust ingress.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.