Description
The Dynamite is a small adjustable spot that clips onto a three-phase track rail, giving you one aimable GU10 head you can slide along the rail and lock where the light is wanted. The round body tilts and turns on its mount, so a single fitting points straight down, angles across a picture or grazes a run of shelves. Lit, it throws one clean directed beam; off, the compact 72mm head reads as a neat black cylinder against the rail.
Because it lives on a track rather than a fixed backplate, several of these heads can share one supply line and each be aimed at a different target, then repositioned whenever a display or layout moves. Its 155mm height holds the head clear of the rail so the beam swings without fouling, which suits a gallery wall, a retail bay or a kitchen run where the focus shifts over time.
The frame is powder-coated metal in matt black and the fitting is rated IP20 for dry indoor rooms. It takes one GU10 lamp, so it works as soon as it is clipped in and wired, and the replaceable cap lets you change brightness or beam angle later by swapping the bulb. It needs a compatible three-phase track, which we can supply alongside.
Specification
| Number of lights |
1 |
| Light source |
1 x GU10 (max 28W, bulb not included) |
| Colour temperature |
Depends on bulb fitted |
| Length |
72mm |
| Height |
155mm |
| Projection |
40mm |
| IP rating |
IP20 |
| Dimmable |
No (dimmable with a dimmable GU10 bulb) |
| Adjustment |
Head tilts and rotates |
| Mounting |
Three-phase track adaptor |
| Frame / Structure finish |
Matt black metal |
| Materials |
Powder-coated metal frame |
Downloads
Datasheet
Assembly Instructions
3D Model
Frequently Asked
What kind of light does the Dynamite give?
One directed beam you can aim. The round GU10 head tilts and rotates on its track mount, so it points at a picture, a shelf or a display rather than washing the whole room evenly.
Does it come with a bulb?
Yes, it takes one GU10 lamp. The cap is replaceable, which lets you swap the bulb later to change the brightness, beam angle or colour tone without altering the fitting.
Can it be dimmed?
There is no dimmer built in, but because it runs a standard GU10 you can dim it by fitting a dimmable GU10 lamp on a compatible track circuit and wall control.
Does it need a track?
Yes, it mounts on a three-phase track rail rather than straight to the ceiling, so it slides and repositions along the run. We can supply matching track and feeds to build the layout.