Free Delivery on all orders over £99*

Duceri LiFePO4 3.2V 1500mAh Replacement Battery With Mounting Bracket

£699
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Duceri D001P is a lithium iron phosphate (LiFePO4) replacement battery rated at 3.2V nominal voltage with 1500mAh capacity, supplied with a mounting bracket for installation in Duceri emergency lighting fittings. The battery uses cylindrical cell construction with a white connector lead at one end and yellow protective caps at both terminals.

Designed as a direct replacement for ageing or failed batteries in Duceri LiFePO4-compatible emergency lighting, the D001P provides the backup power needed to maintain emergency illumination during mains failure. The mounting bracket allows the battery to be secured within the emergency fitting's housing, keeping it in place during installation and preventing movement once the fitting is closed. The connector uses a standard plug compatible with Duceri emergency driver circuits.

LiFePO4 chemistry provides a longer cycle life and greater thermal stability compared to older nickel-cadmium (NiCd) emergency lighting batteries, while maintaining safe operation across typical ambient temperatures found in ceiling voids and above suspended ceilings. The 1500mAh capacity supports emergency run times specified by the original Duceri fitting manufacturer, typically 3 hours of reduced-output emergency illumination depending on LED load.

The battery weighs 48g and measures approximately 65mm in length, making it compact enough for most emergency downlight and panel fittings. Replacement intervals depend on charge/discharge cycling frequency and ambient temperature, but LiFePO4 cells typically maintain adequate capacity for 4-6 years in standard emergency lighting duty before replacement is needed.

Specification
Product Net Weight (KG) 0.048
Product Gross Weight (KG) 0.048
Outer Gross Weight (KG) 17.28
Outer Length (mm) 320
Outer Width (mm) 330
Outer Height (mm) 175
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

Which Duceri fittings is this battery compatible with?

The D001P is designed as a replacement for Duceri emergency lighting fittings that originally shipped with LiFePO4 batteries. Check the existing battery label or the fitting's installation manual to confirm LiFePO4 compatibility before ordering. This battery is not compatible with NiCd or NiMH emergency driver circuits.

How long does the battery last before it needs replacing?

LiFePO4 emergency lighting batteries typically maintain adequate capacity for 4-6 years under normal use, depending on charge/discharge cycling frequency and ambient temperature. Monthly self-test cycles and annual duration tests accelerate ageing slightly compared to fittings that are rarely cycled.

Can I test the battery before installation?

The battery arrives in a partially charged state for safe transport. It should be installed in the emergency fitting and left on charge for 24 hours before conducting a duration test to verify full capacity. Do not attempt to charge the battery outside the emergency driver circuit unless using a LiFePO4-compatible charger with correct voltage and current limits.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Duceri D001P is a lithium iron phosphate (LiFePO4) replacement battery rated at 3.2V nominal voltage with 1500mAh capacity, supplied with a mounting bracket for installation in Duceri emergency lighting fittings. The battery uses cylindrical cell construction with a white connector lead at one end and yellow protective caps at both terminals.

    Designed as a direct replacement for ageing or failed batteries in Duceri LiFePO4-compatible emergency lighting, the D001P provides the backup power needed to maintain emergency illumination during mains failure. The mounting bracket allows the battery to be secured within the emergency fitting's housing, keeping it in place during installation and preventing movement once the fitting is closed. The connector uses a standard plug compatible with Duceri emergency driver circuits.

    LiFePO4 chemistry provides a longer cycle life and greater thermal stability compared to older nickel-cadmium (NiCd) emergency lighting batteries, while maintaining safe operation across typical ambient temperatures found in ceiling voids and above suspended ceilings. The 1500mAh capacity supports emergency run times specified by the original Duceri fitting manufacturer, typically 3 hours of reduced-output emergency illumination depending on LED load.

    The battery weighs 48g and measures approximately 65mm in length, making it compact enough for most emergency downlight and panel fittings. Replacement intervals depend on charge/discharge cycling frequency and ambient temperature, but LiFePO4 cells typically maintain adequate capacity for 4-6 years in standard emergency lighting duty before replacement is needed.

    Specification
    Product Net Weight (KG) 0.048
    Product Gross Weight (KG) 0.048
    Outer Gross Weight (KG) 17.28
    Outer Length (mm) 320
    Outer Width (mm) 330
    Outer Height (mm) 175
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    Which Duceri fittings is this battery compatible with?

    The D001P is designed as a replacement for Duceri emergency lighting fittings that originally shipped with LiFePO4 batteries. Check the existing battery label or the fitting's installation manual to confirm LiFePO4 compatibility before ordering. This battery is not compatible with NiCd or NiMH emergency driver circuits.

    How long does the battery last before it needs replacing?

    LiFePO4 emergency lighting batteries typically maintain adequate capacity for 4-6 years under normal use, depending on charge/discharge cycling frequency and ambient temperature. Monthly self-test cycles and annual duration tests accelerate ageing slightly compared to fittings that are rarely cycled.

    Can I test the battery before installation?

    The battery arrives in a partially charged state for safe transport. It should be installed in the emergency fitting and left on charge for 24 hours before conducting a duration test to verify full capacity. Do not attempt to charge the battery outside the emergency driver circuit unless using a LiFePO4-compatible charger with correct voltage and current limits.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.