Description
The Droxy is a round recessed spotlight that takes a single GU10 or MR16 lamp rated up to 10W, giving you a focused beam from a fitting that sits flush in the ceiling. It runs from either 12V AC/DC via the Gx5.3 base or directly from 220-240V mains through the GU10 cap, so it adapts to the supply you already have. Sold as a US-style recessed spot or downlight housing, it accepts a PAR16 or MR16 reflector lamp, letting you choose the colour temperature and beam spread of the bulb to suit the job. The fitting measures just Ø99mm with a 34mm depth, keeping the recess shallow.
The Droxy suits bathrooms, en-suites and shower areas as well as sheltered outdoor spots such as porches, soffits and covered patios, thanks to its IP65 sealing. Because output depends on the lamp you fit rather than a built-in LED, coverage is best judged by the bulb's beam angle: a narrow reflector throws a tight pool for accent or step washing, while a wider lamp spreads light for general task areas. Plan several units across a ceiling for even coverage rather than relying on one. For wet zones, position it to keep the lens clear of direct spray where possible.
Built from aluminium alloy with a black finish, the Droxy weighs 140g and is rated IP65 against jets and weather on its front face, making it robust enough for damp and exposed locations. It recesses into the ceiling and holds a standard MR16 or GU10 lamp, which is not supplied, so you can match the wattage and tone to the room. Dimming depends entirely on the lamp and driver you pair with it. The black housing gives a discreet, low-profile look once installed. This model joins the wider Droxy range, which includes alternative finishes for matching schemes across a property.
Specification
| Power |
max 10W |
| Voltage |
12 AC; 12 DC; 220-240 AC |
| IP rating |
IP65/20 |
| Mounting |
Recessed Mount In The Ceiling |
| Cap / base |
Gx5.3/GU10 |
| Light source |
MR16/PAR16 |
| Shape |
Round |
| Dimensions |
Ø99 × 34 mm |
| Weight |
140 g |
| Material |
Aluminium Alloy |
| Finish |
Black |
Downloads
Frequently Asked
Can the Droxy be used in a bathroom or outdoors?
Yes. It carries an IP65 rating on the front face, which means it is sealed against water jets and weather, so it is suitable for bathroom zones, shower surrounds and sheltered outdoor locations such as porches and soffits. Always have it wired and positioned by a qualified electrician for the zone in question.
Is a bulb included with this spotlight?
No, the lamp is supplied separately. The fitting accepts a GU10 lamp on mains voltage or an MR16/PAR16 lamp via the Gx5.3 base on 12V, both rated up to 10W. This lets you pick the colour temperature and beam angle that best suit the room.
Is the Droxy dimmable?
Dimming is determined by the lamp and any driver you fit rather than the housing itself. If you use a dimmable GU10 or MR16 lamp paired with a compatible dimmer or driver, the fitting will dim. Check the lamp's specification before installing.
How do I clean the spotlight?
Wipe the lens and black housing with a soft, dry or slightly damp cloth once the lamp has cooled and the power is off. Avoid abrasive cleaners or solvents, which can mark the aluminium finish. In damp or outdoor settings, occasional cleaning keeps the lens clear for full output.