Diyas Crystal Clip-On Lampshade Clear Glass Rods - Polished Chrome 130mm

This Diyas clip-on lampshade combines clear glass rods arranged in a tapered cone with a ring of faceted crystal droplets around the lower rim, all mounted on a polished chrome frame. The shade measures 130mm diameter at the base, 65mm at the top clip ring, and 120mm tall. The glass rods run vertically from the chrome top ring to the chrome base ring, diffusing light from the bulb inside while the cut crystals below refract additional sparkle.

Designed to fit small Edison screw (SES E14) candle bulbs on chandeliers, wall lights and table lamps, the shade clips directly onto the bulb itself rather than fixing to the lamp holder or arm. This clip-on fitting suits multi-arm chandeliers where each bulb position needs an individual shade, and allows the shade to be removed or repositioned without tools. The 60W maximum rating accommodates standard candle bulbs or lower-wattage LEDs.

The polished chrome structure reflects light back through the glass rods, intensifying the output compared to an unshaded bulb while adding decorative diffusion. Each shade weighs 280g, light enough to be supported by the bulb clip without pulling the fitting down. The clear glass and chrome combination suits both traditional crystal chandeliers and contemporary chrome or nickel fixtures where additional sparkle is wanted without blocking too much light.

What bulb fitting does this clip onto?

The shade clips directly onto small Edison screw (SES E14) candle bulbs. The clip mechanism grips the neck of the bulb below the glass candle section, so it works with most standard E14 candle bulbs up to 60W.

Can it be used on a pendant or table lamp?

Yes, provided the lamp uses an E14 candle bulb. Clip-on shades suit any fitting where the bulb is exposed and accessible — chandeliers, wall lights, table lamps and pendants. The shade does not attach to the lamp holder itself, only to the bulb.

How is the shade cleaned?

Remove the shade from the bulb by releasing the clip. Wipe the glass rods and chrome frame with a soft microfibre cloth. For the crystal droplets, use a barely-damp cloth with distilled water to remove dust and fingerprints, then dry immediately to prevent water marks.

Does it reduce light output significantly?

The clear glass rods diffuse light rather than blocking it, so output reduction is minimal compared to fabric or opaque shades. The polished chrome frame reflects additional light back through the glass, helping to maintain brightness while adding decorative refraction.