Cuadrax 2 Light Frosted Glass Wall Light - Antique Brass

The Cuadrax is a 2-light wall fitting built around a rectangular antique brass frame with two frosted glass shades arranged in a horizontal configuration. Each shade is formed from clear optical glass with a frosted finish on the inner surface, creating a layered look where the square outer profile contains a tubular inner section housing a G9 bulb. The antique brass finish on the frame is darker and more oxidised than polished brass, giving the fitting a warmer, aged appearance that suits traditional and transitional interiors.

Designed for hallways, living rooms and bedroom walls where decorative lighting is preferred over ceiling fittings, the Cuadrax works as a single piece or in pairs flanking a fireplace, mirror or doorway. The 135mm projection from the wall positions the shades clear of furniture placed below, and the 240mm horizontal span spreads light across a wider area than a single-shade wall light. The frosted glass diffuses the light from each G9 bulb, reducing glare and turning the fixture itself into a soft, ambient light source rather than a direct spotlight.

The optical glass shades show the internal tubular section when viewed from an angle, creating a geometric detail that distinguishes the Cuadrax from simpler frosted cube designs. The antique brass frame contrasts with the cooler tone of the clear glass, and the 1.1kg weight gives the fitting a solid presence on the wall. The fitting is dimmable when paired with dimmable G9 LED bulbs, allowing the output to be adjusted from low ambient light to brighter task lighting as needed.

What bulbs does the Cuadrax take?

The fitting takes two G9 capsule bulbs, sold separately. Most users pair this with G9 LED bulbs between 2.5W and 5W in warm white (2700K-3000K) for ambient lighting. The specification does not list a maximum wattage, but typical G9 fittings accommodate bulbs up to 40W halogen equivalent.

Is it dimmable?

Yes, when paired with dimmable G9 bulbs and a compatible wall dimmer. The fitting itself does not contain dimming circuitry, so dimmer compatibility depends on the bulbs chosen and the dimmer model installed.

What rooms is it suited to?

The Cuadrax works in hallways, living rooms, bedrooms and dining rooms where decorative wall lighting is preferred. The 135mm projection suits walls where furniture is placed at least 200mm away, avoiding collisions with the shades. The frosted glass and antique brass finish pair well with traditional, transitional and warm-toned contemporary interiors.

Can it be installed as a pair?

Yes. The Cuadrax is often installed in pairs to frame a fireplace, mirror, doorway or bed headboard. When installing multiple fittings, maintain consistent spacing and height to avoid a mismatched appearance.