Coniston 5 Light Bar Crystal Flush Ceiling Light - French Gold

The Coniston is a 967mm rectangular flush ceiling light with a French gold frame supporting cascading layers of cut clear crystal droplets around 11 E14 bulb positions. The crystals hang in a dense curtain pattern that refracts light outwards and downwards, turning each bulb into a multi-directional light source. The French gold finish on the frame is a warm, slightly muted gold that sits between polished brass and antique brass.

Designed as a flush ceiling fitting for rooms where pendant drop would be impractical, the Coniston works in dining rooms, primary bedrooms, dressing rooms and entrance halls with ceiling heights from 2.4m upwards. The 387mm width and 310mm drop from the ceiling allow the fitting to sit close to the ceiling plane while the crystal layers extend downwards to provide decorative presence. The bar format concentrates light along a linear axis, which suits rectangular dining tables and narrow hallways better than a circular flush fitting would.

The combined weight of the crystals and metal frame is 21.8kg, requiring secure fixing to ceiling joists or suitable anchors into solid ceilings. The 11 E14 bulbs are sold separately, allowing choice of warm white (2700K-3000K) LED or filament candle bulbs up to 20W each. Dimming is supported when dimmable bulbs are fitted and paired with a compatible dimmer switch. The French gold finish develops a subtle patina over time depending on ambient humidity and handling during cleaning, which is characteristic of the finish rather than a defect.

What bulbs does the Coniston take?

The fitting takes 11 E14 small Edison screw bulbs, sold separately. Each bulb can be up to 20W. Most users fit warm white LED candle bulbs between 4-6W at 2700K-3000K for ambient dining or bedroom lighting.

Is it dimmable?

Yes, when fitted with dimmable E14 bulbs and paired with a compatible dimmer switch. The dimmer must be rated for the total wattage of all 11 bulbs and compatible with LED if LED bulbs are used.

How is the 21.8kg weight supported during installation?

The ceiling rose backplate must be fixed securely to ceiling joists or solid masonry using appropriate fixings. Installation by a qualified electrician is recommended due to the weight and the need to support the crystal layers during fitting.

How are the crystals cleaned?

Switch off at the mains before cleaning. Wipe each crystal droplet individually with a dry microfibre cloth. For more thorough cleaning, a barely-damp cloth with distilled water is acceptable, but avoid soaking the metal frame or allowing water to run into the bulb sockets.