Coniston 12 Light Crystal Flush Ceiling Light - French Gold (800mm)

The Coniston is an 800mm crystal flush ceiling light built around a French gold circular frame supporting twelve E14 bulb positions across four concentric crystal tiers. Each tier carries facet-cut clear crystal beads strung on the gold frame, creating a layered dome that sits close to the ceiling while maintaining substantial presence through the sheer density of crystal and light sources.

Designed for rooms with lower ceilings where a pendant would hang too far down, the Coniston suits bedrooms, dining rooms, hallways and living rooms with ceiling heights between 2.2m and 2.6m. The 390mm projection from ceiling to lowest crystal tier allows the fitting to be installed without headroom concerns, while the 800mm diameter provides enough visual scale for rooms up to 5m across. The twelve-bulb configuration distributes light across the entire surface area of the fitting rather than concentrating it in a single central source, reducing shadows and creating ambient rather than directional illumination.

The French gold finish on the metal frame sits between polished brass and antique brass in tone — warmer than chrome or polished nickel, but brighter than oil-rubbed bronze. The facet-cut crystals refract light from all twelve bulbs across the gold metalwork, multiplying reflections and creating more sparkle than the bulb count alone would suggest. At 24.3kg the fitting requires secure ceiling mounting to joists or a suitable mounting plate, not plasterboard alone. Dimmer compatibility depends on the bulbs chosen — pair with dimmable E14 LED or halogen bulbs and a trailing-edge dimmer for full control.

What bulbs does it require?

The Coniston takes twelve E14 small Edison screw bulbs, each up to 20W maximum. Bulbs are sold separately. Most users pair this with 4-6W warm-white LED candle bulbs at 2700K-3000K for ambient bedroom or dining room lighting. Total lumen output depends on the bulbs chosen.

Is it suitable for low ceilings?

Yes. The 390mm projection from ceiling to the lowest crystal tier makes the Coniston well-suited to rooms with ceiling heights of 2.2m and above, where a pendant fitting would hang into headroom. The flush-mount design keeps the fitting close to the ceiling while maintaining visual impact through the 800mm diameter spread.

Can it be dimmed?

Yes, if paired with dimmable bulbs. The fitting itself is dimmer-compatible, but the actual dimming behaviour depends on the bulbs chosen. Use dimmable E14 LED or halogen bulbs with a trailing-edge dimmer for smooth control without flicker.

What ceiling fixing is needed for the 24.3kg weight?

The fitting must be mounted to ceiling joists or a secure mounting plate rated for the weight. Do not fix directly into plasterboard without proper backing support. If ceiling joists do not align with the desired position, install a mounting board or plate fixed to multiple joists before mounting the Coniston.