Description
This is a clear LED GLS bulb with the classic rounded pear shape most of us picture when we think of a light bulb. Through the clear glass you can see slim LED filaments standing upright on a glass stem, so it keeps the look of a traditional filament bulb while drawing just 4W. It has an E27 cap, the large screw cap found on a great many lamps and pendants, and it runs straight from mains voltage, so it needs no separate driver or transformer.
The light is warm white at 2700K, the soft, golden tone that suits living rooms, bedrooms and dining rooms in the evening. Because the glass is clear rather than frosted, the filaments become part of the look, which makes this bulb a good choice for open pendants, cage shades, bare-bulb fittings and table lamps where the bulb stays visible. If you are replacing an old filament bulb with an E27 cap, this one swaps straight in and gives a familiar warm glow on just 4W.
It carries energy class E, and the low 4W rating suits a bulb you might leave lit through long evenings. The cap is a silver-coloured metal screw thread, and the clear glass keeps the light crisp and open rather than diffused. Before you buy, check that your lamp or pendant takes an E27 cap, because this bulb will not fit a bayonet holder; if it does, changing it over is a simple screw-in job.
Specification
| Wattage |
4W |
| Technology |
Mains voltage |
| Energy Class |
E |
| Cap |
E27 |
| Colour Temperature |
2700K |
Frequently Asked
Which lamp holder does this bulb fit?
It has an E27 cap, the large screw fitting, so it suits any lamp or pendant with an E27 holder but not a bayonet one.
What colour is the light?
It gives warm white light at 2700K, a soft golden tone that sits comfortably in living rooms, bedrooms and dining rooms.
How much power does it use?
The bulb is rated at 4W and carries energy class E, a low wattage that suits lamps you use every day.
Is the glass clear or frosted?
The glass is clear, so the slim LED filaments inside stay visible, which works beautifully in open pendants and bare-bulb fittings.
Does it need a transformer or driver?
No, it runs straight from mains voltage, so it goes directly into an E27 holder with no separate driver or transformer.