Description
The Chiro is an LED spotlight rated at 23W, drawing 220-240V AC and pushing out 2750 lumens at an efficiency of 120 lm/W. Its 4000K output is a clean, neutral cool white that keeps surfaces crisp without tipping into a cold blue tone, and it carries a CRI of Ra 80 for honest colour reproduction. American buyers searching for an LED spot light or accent spot will find the same fitting here, simply under British naming. The rectangular head and aluminium alloy body give it a compact, directional form that throws a focused pool of light where it is aimed.
Because it carries an IP44 rating, the Chiro suits splash-prone and sheltered positions rather than open exposure. It works well over a bathroom mirror or vanity within the appropriate zone, and equally in a covered porch, carport or sheltered entrance where it stays clear of direct rain. As a single directional fitting its job is to mark or accent rather than wash a whole room, so think of it lighting a wall feature, a doorway or a worktop run rather than providing general ambient cover. Pairing two or more along a wall extends that accent across a larger surface while keeping each beam controlled.
Construction is aluminium alloy with a white finish, which sheds heat well and stands up to the damp of a bathroom or a covered outdoor spot. The IP44 seal resists splashing water and the ingress of small objects, so it holds up where humidity and the odd splash are a factor. This is a fixed-output, non-dimmable fitting that mounts to the wall, and at 912g it sits securely on a standard fixing. Rated for 25,000 hours, it runs for years before output drops. The Chiro range includes further wattages and tones if you need to match it across a scheme.
Specification
| Power |
23W |
| Voltage |
220-240 AC |
| Luminous flux |
2750 lm |
| Efficiency |
120 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| IP rating |
IP44 |
| Dimmable |
No |
| Mounting |
Wall Mounted |
| Lifespan |
25,000 hours |
| Shape |
Rectangular |
| Weight |
912 g |
| Material |
Aluminium Alloy |
| Finish |
White |
Downloads
Frequently Asked
Can the Chiro be used in a bathroom or outdoors?
Its IP44 rating makes it suitable for splash-prone and sheltered positions, including the appropriate bathroom zones and covered outdoor spots such as a porch or carport. It should not be fitted in fully exposed locations, nor where it would face direct water jets or rain, as IP44 protects against splashing only.
What beam does the Chiro give and what does it light?
It is a directional rectangular spotlight, so it casts a focused pool rather than a broad even wash. That makes it well suited to accenting a wall feature, marking a doorway or lighting a defined worktop or vanity area. For wider coverage you can mount several along a wall.
Is the Chiro dimmable?
No, the Chiro is a fixed-output fitting and is not dimmable. It runs at a steady 2750 lumens in a 4000K cool white whenever it is switched on, so there is no need for a compatible dimmer in the circuit.
How do I clean and maintain it?
Wipe the white aluminium alloy housing with a soft, slightly damp cloth and dry it afterwards, avoiding abrasive pads or solvents that could mark the finish. In a bathroom or covered outdoor spot, an occasional wipe keeps splashes and dust from building up on the lens. Always switch the fitting off and let it cool before cleaning.