Description
The Chamonix is a 240mm rectangular outdoor LED wall or ceiling light with a layered construction: an outer white powder-coated aluminium frame holds a clear acrylic panel, behind which sits an opal diffuser panel housing the integrated 9W LED. This creates a three-dimensional depth where light passes through two layers before projecting outward, softening the beam and reducing direct glare from the LED.
Designed for wall mounting beside doorways, on porch ceilings, under eaves, or along covered walkways, the Chamonix delivers 725 lumens at 3000K with a 132-degree beam angle. The IP65 rating protects against dust ingress and water jets from any direction, allowing the light to be fitted in exposed positions where rain reaches the fitting directly. The 100mm projection keeps the fitting clear of the wall surface, allowing air circulation behind the clear panel to reduce condensation buildup in humid conditions.
The white powder-coated finish suits both modern and traditional exterior colour schemes, pairing with white-painted render, timber cladding and grey masonry. The rectangular form provides broader horizontal coverage than a square fitting of similar wattage, making it effective for lighting wider doorways or broader sections of wall. The integrated LED is non-dimmable and rated for 100-240V universal voltage, which simplifies installation on UK 230V mains without requiring a transformer.
Mounting hardware is included. The fitting weighs 1.22kg and should be fixed to a solid wall surface or timber stud rather than plasterboard alone. The clear acrylic outer panel can be wiped with a damp microfibre cloth; avoid abrasive cleaners that scratch the surface.
Specification
| Colour Finish 1 |
White |
| Width |
140mm |
| Height |
240mm |
| Projection |
100mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Beam Angle |
132° |
| Lumen |
725lm |
| Power Consumption |
9W |
| Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP65 |
| Weight |
1.22KG |
| Warranty |
3 Year |
Frequently Asked
Can the Chamonix be used in fully exposed outdoor positions?
Yes. The IP65 rating provides protection against dust and water jets from any direction, meaning the fitting can be mounted in positions where rain reaches it directly. It is commonly used on open porches, exterior walls, and under eaves without additional shelter.
Is it suitable for ceiling mounting?
Yes. The Chamonix can be mounted on either walls or ceilings. When ceiling-mounted, the 100mm projection and downward-angled diffuser direct light onto the area below, making it suitable for porch ceilings and covered entrance areas.
Is the LED replaceable?
No. The LED is integrated into the fitting and is not user-replaceable. The LED is rated for approximately 30,000 hours of operation, which equates to roughly 10 years at typical outdoor usage levels of 8 hours per night.
What wall surfaces can it be mounted on?
The fitting weighs 1.22kg and should be mounted to solid masonry, brick, timber stud or other load-bearing surfaces using appropriate fixings. Plasterboard alone is not suitable without backing support.