CARSA 12W LED Downlight - White

The Carsa is a recessed LED downlight that drops into a ceiling cut-out to sit flush with the surface. It draws 12W from a 220 to 240V AC supply and puts out 780 lumens of neutral 4000K white light, a clean daylight-leaning tone that suits everyday tasks. A wide 110 degree beam angle spreads the output evenly rather than throwing a tight pool, so the light feels soft underfoot. Buyers in the US will know this style as a recessed can light, the integrated fitting that sits inside the ceiling void with only the round trim showing.

The fixed 4000K output works well across kitchens, hallways, utility rooms and home offices where a crisp, neutral light helps with close work and movement. At general lighting levels the 780 lumens cover around 3 m², so a small cluster spaced evenly across a ceiling will light a kitchen or landing comfortably; plan the spacing around the room rather than relying on a single unit. The round 170mm body and shallow 35mm depth suit standard plasterboard ceilings with a modest void above. As an IP20 fitting it is rated for dry indoor positions only, so keep it clear of bathrooms, porches and any damp or exposed location.

Built from aluminium alloy with a white finish, the Carsa carries an IP20 rating for interior ceilings and a round profile that reads neatly once installed. It runs directly from the mains and is recessed into the ceiling rather than surface fixed, holding in place via the cut-out. The unit is not dimmable, so pair it with a standard on/off switch rather than a dimmer. Rated for 15,000 hours and weighing 310g, it is a straightforward integrated downlight with no replaceable lamp. The Carsa range includes other wattages if you need to match output across different rooms.

What size cut-out hole does the Carsa need?

The fitting has an overall trim diameter of 170mm, which is the part that shows once installed. The recessed cut-out, the hole you bore into the ceiling, is smaller than the trim, so always check the cut-out figure on the spec sheet before drilling rather than measuring the trim.

Is the Carsa downlight dimmable?

No, this version is not dimmable and should be wired to a standard on/off switch. Using it on a dimmer circuit can cause flicker or shorten its life, so a non-dimming control is the right pairing here.

How many will I need for a room?

At general lighting levels each unit covers around 3 m², so a small kitchen or hallway typically needs several spaced evenly across the ceiling. Plan the layout for even coverage rather than relying on one fitting to light the whole space.

How do I clean the downlight?

Wipe the white trim and lens with a soft, dry or lightly damp cloth once the fitting is switched off and cool. Avoid solvents and abrasive cleaners, which can mark the aluminium finish over time.