Description
The Capoliveri-E is a pared-back pendant light in black, made from plastic and steel. A cone-shaped ceiling canopy drops to a long black cord and a plain black lampholder, so the bulb itself becomes the whole look. It measures 110cm in overall height and 12cm in diameter, and it takes a single E27 bulb of up to 40W. The bulb is not included, which leaves the choice of glow entirely yours. It is rated IP20, which means it belongs indoors in a dry room, away from bathrooms and steam.
We like it most where a bare bulb has room to be seen: hung low over a kitchen island or a dining table, in a hallway, or as one of several drops along a breakfast bar. Because the fitting is so slim, it suits small rooms and low-key schemes as readily as industrial and loft-style interiors. Pair it with a decorative filament globe for a warm, vintage feel, or a frosted bulb for a softer, even light. Black works against white walls, exposed brick and natural timber alike, so it settles into most homes without fuss.
There is no switch on the fitting itself; it is switched at the wall, just like a standard ceiling light. It runs on 220-240V mains, it is installed by a qualified electrician, and the installation instructions are available as a download. Packed, it weighs just 0.212KG, which makes it easy to handle. A practical tip before you buy bulbs: check the wattage on the packaging and choose one rated at 40W or less, ideally an E27 filament or globe shape that shows off the open lampholder.
Specification
| Overall Height |
110cm |
| Diameter |
12cm |
| Body Material |
Plastic, steel |
| Body Colour |
Black |
| Light Source |
E27 (bulb not included) |
| Wattage |
Max 40W |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Weight (packed) |
0.212KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Capoliveri-E go in a bathroom?
No. It is rated IP20, which means it is meant for dry indoor rooms only, so it should stay away from bathrooms, steam and the outdoors.
Is a bulb included?
No, the bulb is not included. The lampholder takes a single E27 bulb of up to 40W, so you can choose the shape and colour of light you prefer.
How tall is this pendant light?
It measures 110cm in overall height and 12cm in diameter, a long drop that works well over a table or kitchen island.
Does the pendant have its own switch?
No, there is no switch on the fitting. It is switched at the wall, in the same way as a standard ceiling light.
What material is the pendant?
The body is made from plastic and steel in a black finish, with a black cord and a cone-shaped ceiling canopy.
What voltage does it need?
It runs on 220-240V, 50/60Hz mains power, which matches a standard household mains supply for a wired ceiling light.