Brillix 50cm Outdoor LED Bollard Light - Grey, 3000K

The Brillix is a 50cm grey metal LED bollard light with an integrated warm white 3000K LED and an angled head that directs light downwards onto paths and driveways. The die-cast metal construction and IP54 rating protect the internal LED from rain and dust, allowing year-round installation in exposed UK gardens, patios and driveway edges.

Designed for pathway lighting rather than area lighting, the Brillix casts a pool of light approximately 1.5-2m in diameter at ground level, making it suited to marking pathway edges, driveway borders and steps where directional rather than flood lighting is needed. The 50cm height keeps the light source below typical eye level when walking, reducing glare while still providing adequate ground illumination for safe navigation after dark.

The grey powder-coated finish on the metal housing resists UV fading and corrosion, maintaining a consistent tone over multiple seasons. The 138.5mm x 123mm footprint mounts onto a concrete base or paving using a two-bolt fixing plate, with the cable running through the hollow column to a junction box below ground level. The integrated LED draws low wattage and provides a warm 3000K output that pairs well with residential garden lighting schemes without creating the harsh blue-white tone of higher colour temperatures.

What does the IP54 rating mean for outdoor use?

IP54 means the bollard is protected against dust ingress and can withstand water splashing from any direction. It's suitable for exposed garden positions including driveways, patios and open pathways, but is not submersion-proof and should not be installed in areas prone to standing water.

How is the bollard mounted?

The Brillix mounts onto a concrete base or paving slab using a two-bolt fixing plate. The cable runs down through the hollow column to a buried junction box or conduit. Professional installation by a qualified electrician is recommended to ensure weatherproof cable routing and compliance with Part P Building Regulations.

Can the LED be replaced?

The LED is integrated into the fitting and is not user-replaceable. The LED is rated for approximately 25,000-30,000 hours of use, which equates to 10-12 years at typical residential lighting patterns of 6-8 hours per night.

What area does the light cover?

The angled head directs light downwards in a cone, creating a pool approximately 1.5-2m in diameter at ground level. For continuous pathway lighting, space bollards 2-3m apart depending on the desired overlap and ambient light conditions.