Description
Brelora is a three-light ceiling spotlight that pairs a round matt black plate with three cylindrical heads in a brushed brass finish. The body is steel, and the whole fitting measures 25cm across and stands 13cm high, so it sits close to the ceiling without dropping into the room. Each head takes a GU10 bulb of up to 5W, and the bulbs are not included, which leaves you free to choose the colour of light you prefer. It is rated IP44, meaning it is protected from splashing water, so it can go in a bathroom as well as a dry room; a qualified electrician will confirm the right zone.
Because each head pivots independently, you can point light where it is needed: one at the worktop, one across a hallway, one onto a picture on the wall. That makes it a practical choice for kitchens, landings, living rooms and bathrooms, where a single central pendant leaves corners in shade. The black and brass pairing suits a modern or industrial scheme, and the warm metallic heads stand out well against a pale ceiling. It is also a good answer for low ceilings, where a hanging light would sit too low.
There is no switch on the fitting itself; it is switched at the wall, so it works with the switch you already have, and it runs on a 220 to 240V mains supply. As a wired-in mains light, it is installed by a qualified electrician. The installation instructions come as a download, and the packed weight is 1.342KG, which is useful to know when you plan the job. Order your GU10 bulbs alongside it, up to 5W each, so the light is ready on the day it is fitted.
Specification
| Height |
13cm |
| Diameter |
25cm |
| Body Material |
Steel |
| Body Colour |
Black, brushed brass |
| Light Source |
GU10 (bulb not included) |
| Wattage |
Max 3 x 5W |
| Switch |
None (switched at the wall) |
| IP Rating |
IP44 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Weight (packed) |
1.342KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can this spotlight go in a bathroom?
Yes. It is rated IP44, so it is protected from splashing water and suits a bathroom; a qualified electrician will confirm the right zone.
Which bulbs does it take?
Each of the three heads takes a GU10 bulb of up to 5W. The bulbs are not included, so you choose your own.
How big is the fitting?
It is 25cm across and 13cm high, a compact size that sits neatly on most ceilings, including lower ones.
Can the heads be angled?
Yes. Each of the three brushed brass heads is adjustable, so you can aim light at a worktop, a doorway or a picture independently.
What material is the body?
The body is steel, with a matt black ceiling plate and three heads in a brushed brass finish.
Does it have its own switch?
No. There is no switch on the fitting itself; it is switched at the wall, using your existing light switch.